Bedienungsanleitung Husqvarna Automower 405X - 2023 (Seite 25 von 52) (Englisch)

819083

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

2. Use the arrow buttons and the OK button to

move through the menu structure

Weather timer

> Cutting time

3. Use the arrow buttons to select

Low, Mid

High

frequency.

4. Push the BACK button.

4.2.8 Installation

In the Installation menu it is possible to adapt the

settings of the product for best mowing result.

4.2.8.1 GPS Assisted Navigation, Lawn Coverage and

Systematic Passage Mowing

The

GPS Assisted Navigation

function helps the product

to select the most optimal operation. Use the

Lawn

coverage

function to do manual settings or to use the

function

Systematic Passage Mowing

If the work area includes remote parts that are

connected with narrow passages, the

Lawn Coverage

and

Systematic Passage Mowing

function are useful to

be able to maintain a well-cut lawn in all parts of the

yard. The

Lawn Coverage

function is used to guide

the product to remote parts of the work area. The

Systematic Passage Mowing

function is used for narrow

passage mowing. A guide wire must be installed to use

these functions. You can set a maximum of 3 remote

areas.

With the

Lawn Coverage

function the product first

follows and then leaves the guide wire after a certain

distance and starts to mow the lawn.

The

Systematic Passage Mowing

function is suitable

to mow narrow passages of 60 cm - 1.5 m / 23 in. -

4.9 ft. width. The product moves in a pattern to cover

the passage width. The product starts the

Systematic

Passage Mowing

at the set distance from the charging

station. When the product reaches the end of the narrow

passage, the product continues and cuts the lawn as

normal.

Area A, approximately 50%

Area B, approximately 30%

Area C, approximately 20%

To set the GPS Assisted Navigation

Disable the GPS Assisted Navigation to make manual

settings in

Lawn coverage

Note: It is recommended to use GPS Assisted

Navigation.

1. Do steps 1–3 in

To get access to the menu in the

display of the product on page 22

2. Use the arrow buttons and the OK button to move

through the menu structure

Installation > Lawn

coverage

3. Push the OK button to enble or disable the

function.

4. Push the BACK button.

To set the Lawn Coverage function

1. Do steps 1–3 in

To get access to the menu in the

display of the product on page 22

2. Use the arrow buttons and the OK button to

move through the menu structure

Settings > Lawn

Coverage > Area 1-3

3. Use the arrow button to select the area.

4. Push the OK button.

5. Measure the distance from the charging station

to the start of the area. Measure along the guide

wire. Refer to

To measure the distance from the

charging station on page 26

6. Push the arrow buttons to select the distance,

measured in m.

7. Push the OK button.

8. Use the arrow buttons to select the percentage of

the cutting time the product must cut the area. The

percentage is equal to the percentage of the area

in relation to the complete work area.

a) Measure the area.

1650 - 006 - 20.02.2023 Product settings - 25

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Husqvarna Automower 405X - 2023 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Husqvarna Automower 405X - 2023

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info