Bedienungsanleitung Husqvarna Automower 410XE NERA - 2024 (Seite 21 von 48) (Englisch)

819071

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

4.3.2 Object avoidance

Object avoidance

is only available for Automower®

410XE NERA.

The products senses objects on the lawn that is higher

than the grass with the

Object avoidance

function

enabled. When the product senses an object on the

lawn, the product turns and continues to cut in a

different direction. You can disable the

Object avoidance

function if it is unsatisfactory for your work area.

Note:

Object avoidance

can cause that the grass is

not cut around objects. The sensors can also sense high

grass or flowers in the work area as objects.

4.3.3 Weather timer

Weather timer

automatically adjust the cutting time to

the growth of the grass. The product is not permitted to

operate more than the schedule settings.

Note: When using

Weather timer

, it is recommended

to make as much operating time as possible available

for

Weather timer

. Do not restrict the schedule more

than necessary.

The first operation of the day is set by the schedule

settings. The product always complete 1 mowing cycle,

and then

Weather timer

selects if the product will

continue to operate or not.

Note:

Weather timer

is reset if the product does not

operate for more than 50 hours, or if a

Reset of all user

settings

is done.

Weather timer

is not changed if a

Reset

of schedule settings

is done.

4.3.4 ECO mode

ECO mode

disables the signal in the boundary wire,

guide wire and the charging station, when the product is

parked or is charging. The LED indicator of the charging

station flashes green when the loop signal is disabled.

Note: Use

ECO mode

to save energy and to prevent

interference with other equipment, for example hearing

loops or garage doors.

Note: To start the product manually in the work area

you must first enable the loop signal.

4.3.4.1 To enable the loop signal

1. Set the product to ON.

2. Put the product in the charging station.

3. Push the STOP button.

4. Wait 2 seconds and then remove the product from

the charging station.

5. Make sure that the LED indicator of the charging

station is solid green.

6. Put the product where you want it to start to cut.

4.3.5 EdgeCut

The product has EdgeCut which makes the product cut

the edges of your lawn. You can disable EdgeCut in the

app during season with low grass growth.

4.4 Installation

Installation

you can change the installation settings of

the product.

4.4.1 To find the charging station

The product can be set to search for the charging station

in 3 methods:

•

Charging station signal

•

Follow boundary wire

•

Follow guide wire

The factory setting is set to use the 3 search methods

at the same time. Use the factory setting to find the

charging station as fast as possible and to keep the risk

of tracks on the lawn to a minimum. The product always

starts to search for the

Charging station signal

. After

a specified time interval, it also uses

Follow guide

and

Follow boundary wire

Causes why the product cannot follow the wire:

• Obstacles near the wire have not been isolated.

• The charging station, the boundary wire or the

guide wire are not installed according to the

instructions in

To install the charging station on

page 16

To install the boundary wire on page 17

and in

To install the guide wire on page 18

4.4.1.1 Charging station signal

For some installations it is necessary to decrease the

signal of the charging station. For example when the

charging station is put near an obstacle, such as a bush

or a wall. The product finds the charging station signal

on the other side of the obstacle and tries to find the

charging station, but the object prevents it to go to the

charging station. You can set the charging station signal

min

avg

max

Note: Husqvarna recommends to set the charging

station signal to

max

. It is usually better to move the

charging station, than to decrease the range of the

charging station signal.

2369 - 001 - 05.02.2024 Settings - 21

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Husqvarna Automower 410XE NERA - 2024 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Husqvarna Automower 410XE NERA - 2024

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info