Bedienungsanleitung Husqvarna Automower 430X NERA - 2024 (Seite 24 von 52) (Englisch)

819077

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

4.4.2.3 To measure the distance from the charging

station

The product follows the guide wire to measure the

distance to the charging station.

1. Put the product in the charging station.

2. Select

Test: Area 1 setup

Test: Area 2 setup

measure the distance.

3. Push the STOP button to show the distance in the

app.

4.4.3 Corridor width

The boundary wire corridor is the area adjacent to

the boundary wire. The product uses the corridors to

find the charging station. The corridor width is adjusted

automatically. If it is necessary to adjust the corridor

width manually for the product to operate satisfactorily,

you can set the corridor width between 1-9.

4.4.4 Reversing distance

The reversing distance makes the product move in

reverse for a set distance, before the product starts to

cut the lawn.

4.4.5 Drive Past Wire function

The front of the product always moves past the

boundary wire by a specified distance. Then the product

moves rearward and changes direction. The factory

setting is 32 cm / 13 in. You can select a distance of

25-50 cm / 10-20 in.

Note: If you change the distance for

Drive Past Wire

the distance will change along the boundary wire in all

parts of the work area.

4.5 Accessories

Accessories

you can change the settings of the

product accessories.

4.5.1 Headlights

Headlights is only available for Automower® 430X/450X

NERA.

There are 4 different headlight settings that control when

the headlights are on:

•

Always on

•

Evening only (19:00-00:00)

•

Evening and night (19:00-07:00)

•

Always off

The default setting is

Always on

. The headlights can be

set to flash if there is an error.

4.5.2 To avoid collisions with the

Automower® house

When this option is enabled, the wear on the product

and the Automower® house is reduced, but it can result

in more uncut grass around the charging station.

4.6 General

In the

General

menu you can set the time and date, or

reset to factory settings.

This menu is only available when your mobile device is

connected to the product with Bluetooth®.

4.6.1 Time & date

The time and date can be changed manually, or by

using the time and date from the mobile device.

4.6.2 Reset to factory settings

The user settings can be reset to factory settings.

Note:

PIN code, Loop signal, Messages

and

Date &

Time

will not be reset.

4.7 Security

The security settings controls the PIN code, the

GeoFence and other security functions. The correct PIN-

code must be entered to get access to the

Security

menu.

This menu is only available when your mobile device is

connected to the product with Bluetooth®.

4.7.1 New loop signal

The loop signal is randomly selected to create a unique

link between the product and the charging station. In

rare cases, there may be a need to generate a new

signal, for instance if 2 adjacent installations have a very

similar signal.

4.7.2 Change PIN code

You can change the PIN code. Make a note of the new

PIN code in Memo. Refer to

Introduction on page 6

4.7.3 Theft protection

In the

Theft protection

menu it is possible to set the

alarm duration and also what events should trigger the

24 - Settings 2071 - 002 - 05.02.2024

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Husqvarna Automower 430X NERA - 2024 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Husqvarna Automower 430X NERA - 2024

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info