Bedienungsanleitung Husqvarna AUTOMOWER 440 (Seite 87 von 100) (Englisch)

684092

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

English - 85

TROUBLE SHOOTING

Solid blue light

Weak signal as the boundary wire is

too long. Max length is 800 meters.

No steps have to be taken if the robotic

lawnmower operates as expected.

Shorten the boundary wire by reducing the

working area or replacing islands with barriers the

robotic lawnmower can collide with.

Solid red light

Defective circuit board in the

charging station

Contact the local dealer.

9.4 Symptom

If your robotic lawnmower does not work as expected, follow the troubleshooting guide below.

There is a FAQ (Frequently Asked Questions) on www.automower.com which provides more detailed answers to a



Symptom Cause Action

The robotic

lawnmower has



with the charging

station

The charging station is on a slope

Place the charging station on a surface that is

entirely level. Refer to 3.2 Installation of Charging

Station page 17.

The boundary wire is not laid

correctly by the charging station.

Check that the charging station has been

installed according to the instructions, see 3.2

Installation of Charging Station on page 17.

Uneven mowing

result

The robotic lawnmower works too

few hours per day.

Increase the working hours, see 6.3 Timer on

page 43.

The Weather timer senses that the lawn has

been mowed more than it actually has. Increase

the intensity level in the Weather timer. Shut

down the Weather timer if this does not help.

The shape of the working area

requires manual settings to be made



way to all remote areas.

Also use Lawn coverage > More to steer the

robotic lawnmower to one or more remote

areas, see Installation on page 79.

Working area too large.

Try to limit the working area or extend the

working time, see 6.3 Timer on page 43.

Dull blades.

Replace all the blades and screws so that the

rotating parts are balanced, see 8.7 Blades on

page 78.

Long grass in relation to the set

cutting height.

Increase the cutting height and then lower

successively.

Accumulation of grass by the blade

disc or around the motor shaft.

Check that the blade disc skid plate rotate easily.

If not, unscrew the blade disc and remove grass

and foreign objects, see 8.5 Transport and

Moving on page 77.

The robotic

lawnmower runs at

the wrong time

The robotic lawnmower clock needs

to be set.

Set the clock, see 6.9 Settings on page 61.

The start and stop times for mowing

are incorrect.

Readjust the start and stop time setting for

mowing, see 6.3 Timer on page 43.

1157866-26,420,430X,450X,EN_160314.indd 85 2016-03-14 17:00:04

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Husqvarna AUTOMOWER 440 Seite 87

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Husqvarna AUTOMOWER 440

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info