Bedienungsanleitung Husqvarna Automower 450X NERA - 2023 (Seite 16 von 48) (Englisch)

819081

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

ft. With a guide wire installed through the passage,

the recommended minimum distance between the

boundary wires is 60 cm / 24 in.

• If the work area has areas which are connected by

a narrow passage (B), you can set the product to

first follow and then leave the guide wire after a

certain distance (C). The settings can be changed

GPS assisted navigation on page 22

• Use the GPS Assisted Navigation that helps the

product select the most optimal operation. Refer to

Lawn coverage on page 22

• If the work area includes a secondary area (D),

refer to

To make a secondary area on page 15

Put the product in the secondary area and select

Secondary area mode

3.5 Installation of the product

3.5.1 Installation tools

• Hammer/plastic mallet: To simplify putting the

stakes into the ground.

• Edge cutter/straight spade: To bury the boundary

wire.

• Combination pliers: For cutting the boundary wire

and pressing the connectors together.

• Adjustable plier: For pressing the couplers

together.

3.5.2 To install the product

Do the general steps that follow to install the product:

1. Install the Automower® Connect app on your

mobile device. Refer to

Automower® Connect app

on page 16

2. Do a pairing operation of the product and the

Automower® Connect app. Do the basic settings in

the start up sequence in the Automower® Connect

app. Refer to

To install the Automower® Connect

app on page 17

3. Install the charging station. Refer to

To install the

charging station on page 17

4. Install the boundary wire. Refer to

To install the

boundary wire on page 18

5. Install the guide wire. Refer to

To install the guide

wire on page 18

6. Make sure that the charging station is installed

correctly. Refer to

To do a visual check of the

charging station on page 19

3.5.3 Automower® Connect app

The product can connect to mobile devices that have

the Automower® Connect app installed. Automower®

Connect is a free app for your mobile device. You

can use the extended functions for the product in the

Automower® Connect app.

• The

Dashboard

shows the current operation of the

product. You can select an operating mode for the

product in the dashboard.

• The

Map

shows the current position of the product

and the set center point for the GeoFence function.

• In the

Settings

menu you can set the settings for

the product.

• In the

Statistics

menu you can see the statistics of

the product.

• In the

Messages

menu you can find the

Fault

messages

and the

Information messages

of the

product.

• In the

Support

menu you can find the full operator's

manual for the product and the

Help Center

where

you can get help with troubleshooting.

16 - Installation 2071 - 001 - 29.03.2023

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Husqvarna Automower 450X NERA - 2023 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Husqvarna Automower 450X NERA - 2023

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info