Bedienungsanleitung Husqvarna Automower 450X NERA - 2024 (Seite 6 von 52) (Englisch)

819078

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

2 Introduction

2.1 Introduction

Factory PIN code: 1234

Serial number:

Product number:

The serial number and the product number are on the product rating plate and on the product carton.

• Register your product on www.husqvarna.com. Enter the serial number of the product, the product number and

the date of purchase to register your product.

2.2 Support

For support about the product, speak to your Husqvarna

servicing dealer.

2.3 Product description

Note: Husqvarna regularly updates the appearance

and function of the products. Refer to

Support on page

The product is a robotic lawn mower. The product has a

battery power source and operates automatically. When

the battery state of charge is low the product goes to the

charging station to charge. The product starts to operate

again when the battery is fully charged.

The frequent cutting technique improves the grass

quality and decreases the use of fertilizers. Collection

of grass is not necessary.

2.3.1 Installation method

You can install the product with a boundary wire or

without boundary wire with EPOS™. A boundary wire is

not necessary if you install the product with EPOS™.

For installation of the boundary wire, refer to

Installation

on page 12

. For installation with EPOS™, read the

operator’s manual that is included with the reference

station.

2.3.2 Automower® Connect

Automower® Connect is a mobile application that makes

it possible to select the operation settings remotely.

Automower® 320 NERA can connect to the app with

Bluetooth® and Wi-Fi. Automower® 430X/450X NERA

can connect to the app with Bluetooth®, Wi-Fi and

cellular connectivity. When you are near the product

you can connect your mobile device and the product

with Bluetooth®. It is necessary to be connected with

Bluetooth® to make some settings. When the product

is connected to your Wi-Fi network or to the cellular

network you can control the product from everywhere.

You can also make the settings of the product. Refer to

Automower® Connect app on page 17

2.3.3 Automower® Access

Automower® Access is the user interface of the product,

it includes the display, the jog wheel, the START

button and the STOP button. In Automower® Access

you can set the cutting height and start, stop and

park the product. Refer to

Menu structure overview in

Automower® Access on page 10

2.3.4 Automower® Intelligent Mapping

(AIM)

Automower® Intelligent Mapping (AIM) is available in the

Automower® Connect app. Use Automower® Intelligent

Mapping (AIM) to make a virtual map of your lawn and

installation. In the map you can make virtual work areas

and stay-out zones. Refer to

Automower® Intelligent

Mapping (AIM) on page 25

6 - Introduction 2071 - 002 - 05.02.2024

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Husqvarna Automower 450X NERA - 2024 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Husqvarna Automower 450X NERA - 2024

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info