• Put the charging station in an area with good
airflow.
•Use a residual-current device (RCD) with a tripping
current of maximum 30 mA when you connect the
mains cable to the power outlet.
CAUTION: Do not install the charging
station where there are metal objects
in the ground. Metal objects can cause
interference with the charging station signal.
3.6 To examine where to install the
objects on the map
CAUTION: If the work area is adjacent
to water bodies, slopes, precipices or a
public road, the virtual boundary must have
a protective wall. The wall must be minimum
15 cm / 6 in. in height.
CAUTION: Do not let the product
operate on gravel.
CAUTION: For careful operation
without noise, isolate all obstacles such as
trees, roots and stones.
Note: Make a blueprint of the work area before you
install the virtual boundaries.
• Make sure that the product can receive radio
signals from the reference station in all parts of the
work area. Make sure that the maximum distance
between the reference station and the product is
500 m / 1640 ft.
Note: The maximum distance decreases if there
are objects between the reference station and
product.
3.6.1 To examine where to install the
objects on the map for good satellite
coverage
When the product operates it must have unimpeded sky
view to use the satellite signals for navigation.
•Make sure that 90° section of the sky is
unimpeded.
Note: Objects that are less than 1 m / 3.3 ft. in
height (A) does not impede the satellite signals.
Note: Tree canopies that are less than 4 m /
13 ft. in diameter does not impede the satellite
signals. If there are many small trees put together
in an area, if the diameter of their canopies put
together is less than 4 m / 13 ft. they do not
impede the satellite signals.
• For trees with tree canopies that is more than 4
m / 13 ft. in diameter (A), make a stay-out zone (B)
around the trees.
