Bedienungsanleitung Husqvarna Designer I (Seite 12 von 117) (Englisch)

517460

Zoom out

Zoom in

Vorherige Seite

1/117

Nächste Seite

Learn your Designer I

Stitch Re-start. To start sewing your se-

lected stitch at the beginning of the stitch

without having to re-set any special set-

tings you have made.

STOP is used to conclude a stitch. Your

De sig ner I fastens the thread and stops

automatically when one stitch sequence

has been completed. The button lights

up when you touch it. STOP is cancelled

when you touch the button again or by

selecting a new stitch. The button light

will go out. The STOP function can be

programmed. It can also be used for one

color embroidery.

FIX is automatically activated when a

stitch is selected or when Thread Cutter

has been used. The button lights up while

FIX function is active. By touching the

lighted button the function can be turned

off. At the beginning – De sig ner I sews a

few tie off stitches and goes on with the

selected stitch. Touch FIX while sewing

– De sig ner I sews a few tie off stitches

and stops automatically. The FIX function

can be programmed.

Reverse – your Designer I sews in reverse

when this button is touched. The button

lights up. De sig ner I sews forwards when

the button is released and the light goes

out. The longest reverse stitch length is

3mm. For permanent reverse, touch the

button twice in quick succession before

starting to sew. The button will be lit up

and the De sig ner I sews in reverse until

you touch the button again to cancel.

Needle stop up/down. Touch this button

to move the needle down or up. The set-

ting of the needle stop po si tion is changed

at the same time. You can also tap the

foot control to raise or lower needle.

Touch + SPEED or - SPEED to increase or

decrease the sewing speed. Touch when

not sewing and a Pop-up menu on the

Color Touch Screen indicates the speed

set ting. Touch OK or start sewing and

the pop up goes out. You can change the

speed set ting while sewing but no Pop-up

will appear. All stitches in De sig ner I have

Function buttons

a pre-set, recommended sewing speed.

When you select a stitch, De sig ner I auto-

matically sets the correct sewing speed.

START/STOP. Touch this button to run

and stop the machine without the foot

control. Touch START/STOP to begin and

touch again to stop sewing.

Selective Thread Cutter. Touch the

button and De sig ner I cuts the top and

bobbin threads, raises the presser foot

and the needle to the up po si tion and

activates the FIX function. To cut before

the needle moves to the start position of

next stitch, touch Thread Cutter while the

machine is running. A ﬂ ashing STOP will

indicate that a cut is requested. The Th-

read cutter function can be programmed.

Sensor Foot Lift up and extra lift.

Touch this button and the pres ser foot

and the needle will be lifted to up po-

si tion. Touch the button once more and

the pres ser and foot will raise to ex tra lift

to make it easy to get thick fabric under

the pres ser foot.

Sensor Foot Lift pivot. To simplify pla-

cing the fabric, touch this button. The

pres ser foot will be lowered to pivot po-

si tion.

Sensor Foot Lift down. Touch this but-

ton and the pres ser foot will be comple-

tely lowered and De sig ner I is ﬁ rmly hol-

ding your work.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Husqvarna Designer I Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Husqvarna Designer I

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info