Bedienungsanleitung Husqvarna Designer SE - Limited Edition (Seite 65 von 100) (Englisch)

609910

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

4-11

Embroidery Mode

Important Resize Information

Because embroidery designs are digitized for a speciÀ c

design size, it is important to consider some of the following

information for resizing designs in Designer SE Limited

Edition.

• Your resizing is always proportional. For example

a design reduced 50% will be 50% smaller in

both length and width. When reducing a detailed

design, it is possible that some details may be lost

or distorted and/or heavy stitch build up may be

created in the detailed area of the design because

more stitches may be retained in that area. In some

cases it is recommended to reduce detailed designs

only to 75%.

• Always embroider a test sample of your resized

design before sewing on a garment or project.

• View your resized design in 3D on the Interactive

Designer Screen and be sure it À ts in the hoop as

the Resize function will allow you to resize larger

than the hoop size. In this case when you try to

toggle to Interactive Designer Embroidery, there will

be a pop up message “Design outside hoop area”.

• When enlarging a design a great deal you may see

stitch irregularities within the design. Resize to a

smaller percentage for a better result. Due to the

memory in your Designer SE Limited Edition, you

may À nd a design that is too complex to resize in the

machine. We recommend that you resize very large

and/or complex designs on your PC computer in

one of the embroidery programs which are available

from your Husqvarna Viking Dealer as an accessory.

• When repeating the resize function on a design that

is on the Interactive Designer Screen but has not

yet been saved, it will always go back to the original

design for a new resizing, which ensures the best

stitch quality possible. When a design has been saved

at a resized size and is brought to the Interactive

Designer Screen again for resizing, the new resizing

will be made on a design that has already been

resized and this can cause stitch irregularities. For

best result always begin the Resize function with a

design of original size.

• Depending on how much you resize a design, and

on how many stitches it contains, the resize process

will take longer or shorter time. Resizing a very

large or complex design can take up to a couple of

minutes. Once you touch

you cannot cancel

the resize process but need to wait for it to À nish.

Touching

in the customizing screen will

restore the design to its original appearance.

• We recommend using scaling instead of resize for

changing the design size less than 20% and for

embroideries digitized with single or triple stitches

such as cross stitch embroideries. In this case you do

not want to add stitches to the design, only to make

the design larger or smaller by making each original

stitch larger or smaller.

• It does not matter in what order you adjust the size,

rotate, mirror etc. When you touch

Designer

SE Limited Edition always resizes À rst, and then

adds the rotation, mirroring etc.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Husqvarna Designer SE - Limited Edition Seite 65

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Husqvarna Designer SE - Limited Edition

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info