Bedienungsanleitung Husqvarna Designer SE - Limited Edition (Seite 90 von 100) (Englisch)

609910

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

6-4

Care of your Designer SE

Presser foot will not go down?

• Turn the machine off and on.

• Set Sensor Foot lift on auto in Set Menu.

Interactive Designer Screen contrast is dark

(or light?)

• Change screen contrast in Set Menu.

Interactive Designer Screen is off?

• Touch screen.

• Cancel screen saver in Set Menu.

• Turn machine off and on to reset.

Buttons on Interactive Designer Screen are

not activated when touched?

• Calibrate the Interactive Designer Screen. See

instructions on page 1-27.

Machine sews slowly?

• Check speed.

• Remove stitch plate and brush lint from bob bin and

teeth area.

• Have machine serviced at your retailer.

Machine will not sew?

• Check power and foot control plugs are properly

plugged into machine.

• Check wall plug and power to wall plug.

Embroidery puckers?

• Use correct stabilizer – see Accessory User’s Gui de.

• Hoop fabric tightly – see page 3-4.

Machine will not embroider?

• Push embroidery unit À rmly into machine socket.

• Slide on hoop.

E Light

The long lasting diodes of the E Light do not need to

be replaced. If you experience problems with your E

Light, take your Designer SE Limited Edition to your

retailer.

Have your Designer SE Limited Edition

serviced regularly by your Husqvarna Viking

retailer.

If you have followed this trouble shooting in for ma tion

and still are having sewing or embroidery problems,

take it to your retailer. If there is a speciÀ c problem, it

is a gre at help to test sew with your thread on a scrap

of your sewing fabric. A sewing sample will often give

much better information than words to the technician.

Non-original Parts and Accessories

The Designer SE Limited Edition warranty does not

cover any defect or dam age caused by use of non-

ori gi nal ac ces so ries or parts.

How to update Designer SE

Limited Edition

All information in this Husqvarna Viking Designer SE

Limited Edition User’s Guide is current at the time of

printing.

We constantly receive feedback from Designer SE

Limited Edition owners and retailers and use this

in for ma tion to produce updates and upgrades.

Updating instructions

• Install the software CD which is delivered with your

Designer SE Limited Edition.

• Open the ConÀ gure program and touch the button

Smart Update.

• Follow the instructions.

NOTE: When installing the software you will be asked to

to update, your Designer SE Limited Edition must be

registered. You can register online or by printing out the

registration form and mailing it in.

Be sure to consult the web site at www.husqvarnaviking.com

and/or your local Husqvarna Viking retailer often for updates

and upgrades to your Designer SE Limited Edition and User’s

Guide.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Husqvarna Designer SE - Limited Edition Seite 90

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Husqvarna Designer SE - Limited Edition

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info