Bedienungsanleitung Husqvarna Designer SE (Seite 65 von 100) (Englisch)

609909

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

4-11

Embroidery Mode

Important Resize Information

Because embroidery designs are digitized for a

speciﬁ c design size, it is important to consider

some of the following information for resizing

designs in Designer SE.

• Your resizing is always proportional. For

example a design reduced 50% will be 50%

smaller in both length and width. When

reducing a detailed design, it is possible that

some details may be lost or distorted and/or

heavy stitch build up may be created in the

detailed area of the design because more

stitches may be retained in that area. In some

cases it is recommended to reduce detailed

designs only to 75%.

• Always embroider a test sample of your resized

design before sewing on a garment or project.

• View your resized design in 3D on the

Interactive Designer Screen and be sure it ﬁ ts

in the hoop as the Resize function will allow

you to resize larger than the hoop size. In

this case when you try to toggle to Interactive

Designer Embroidery, there will be a pop up

message “Design outside hoop area”.

• When enlarging a design a great deal you may

see stitch irregularities within the design. Resize

to a smaller percentage for a better result. Due

to the memory in your Designer SE, you may

ﬁ nd a design that is too complex to resize in

the machine. We recommend you resize very

large and/or complex designs on your PC

computer in the 3D Embroidery Studio or 3D

Stitch Editor Embroidery Software Program

which are available from your Husqvarna

Viking Dealer as an accessory.

• When repeating the resize function on a design

that is on the Interactive Designer Screen

but has not yet been saved, it will always go

back to the original design for a new resizing,

which ensures the best stitch quality possible.

When a design has been saved at a resized

size and is brought to the Interactive Designer

Screen again for resizing, the new resizing will

be made on a design that has already been

resized and this can cause stitch irregularities.

For best result always begin the Resize

function with a design of original size.

• Depending on how much you resize a design,

and on how many stitches it contains, the

resize process will take longer or shorter

time. Resizing a very large or complex design

can take up to a couple of minutes. Once

you touch

you cannot cancel the resize

process but need to wait for it to ﬁ nish.

Touching

in the customizing screen will

restore the design to its original appearance.

• We recommend using scaling instead of resize

for changing the design size less than 20% and

for embroideries digitized with single or triple

stitches such as cross stitch embroideries. In

this case you do not want to add stitches to

the design, only to make the design larger or

smaller by making each original stitch larger or

smaller.

• It does not matter in what order you adjust the

size, rotate, mirror etc. When you touch

Designer SE always resizes ﬁ rst, and then adds

the rotation, mirroring etc.

DSE 05 Kap 4.indd 4-11 05-03-18 16.32.53

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Husqvarna Designer SE Seite 65

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Husqvarna Designer SE

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info