Bedienungsanleitung Husqvarna Designer SE (Seite 90 von 100) (Englisch)

609909

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

6-4

Care of your Designer SE

Wrong stitch, irregular or narrow stitches?

• Cancel twin needle safety and/or straight stitch

safety.

• Turn machine off and on to reset.

• Change needle; re-thread top and bobbin.

• Use stabilizer.

Presser foot will not go down?

• Turn the machine off and on.

• Set Sensor Foot lift on auto in Set Menu.

Interactive Designer Screen contrast is dark

(or light?)

• Change screen contrast in Set Menu.

Interactive Designer Screen is off?

• Touch screen.

• Cancel screen saver in Set Menu.

• Turn machine off and on to reset.

Buttons on Interactive Designer Screen are

not activated when touched?

• Calibrate the Interactive Designer Screen. See

instructions on page 1-27.

Machine sews slowly?

• Check speed.

• Remove stitch plate and brush lint from

bob bin and teeth area.

• Have machine serviced at your retailer.

Machine will not sew?

• Check power and foot control plugs are

properly plugged into machine.

• Check wall plug and power to wall plug.

Embroidery puckers?

• Use correct stabilizer – see Accessory User’s

Gui de.

• Hoop fabric tightly – see page 3-4.

Machine will not embroider?

• Push embroidery unit ﬁ rmly into machine socket.

• Slide on hoop.

SE! Light

The long lasting diodes of the SE! Light do not

need to be replaced. If you experience problems

with your SE! Light, take your Designer SE to

your retailer.

Have your Designer SE serviced regularly by

your Husqvarna Viking retailer.

If you have followed this trouble shooting

in for ma tion and still are having sewing or

embroidery problems, take it to your retailer. If

there is a speciﬁ c problem, it is a gre at help to test

sew with your thread on a scrap of your sewing

fabric. A sewing sample will often give much

better information than words to the technician.

Non-original Parts and Accessories

The Designer SE warranty does not cover any

defect or dam age caused by use of non-ori gi nal

ac ces so ries or parts.

How to update Designer SE

All information in this Husqvarna Viking

Designer SE User’s Guide is current at the time

of printing.

We constantly receive feedback from Designer SE

owners and retailers and use this in for ma tion to

produce updates and upgrades.

Updating instructions

• Install the CD Designer SE 3D Embroidery

Software – 3D QuickFont, 3D Organizer and

Computer Connection – which is delivered

with your Designer SE.

• Open the program 3D Conﬁ gure and touch

the button Smart Update.

• Follow the instructions.

NOTE: When installing the CD Designer SE 3D

Embroidery Software you will be asked to register

your Designer SE. To be able to update, your

Designer SE must be registered. You can register

online or by printing out the registration form and

mailing it in.

Be sure to consult the web site at

www.husqvarnaviking.com and/or your local

Husqvarna Viking retailer often for updates and

upgrades to your Designer SE and User’s Guide.

DSE 06 Kap 6ENG.indd 6-4 06-11-06 14.14.59

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Husqvarna Designer SE Seite 90

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Husqvarna Designer SE

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info