609685
18
Zoom out
Zoom in
Vorherige Seite
1/104
Nächste Seite
1 23
1
2
2:2
UNPACKING
1. Place the machine on a sturdy, at surface, remove the
packaging and lift off the cover.
2. Remove the packing material and the foot control.
3. The machine is delivered with an accessory bag, a power
cord and a foot control cord.
4. Wipe the machine, particularly around the needle and
stitch plate to remove any soil before sewing.
Note: Your HUSQVARNA VIKING
®
DESIGNER TOPAZ
40 sewing and embroidery machine is adjusted to provide the best stitch
result at normal room temperature. Extreme hot and cold temperatures
can affect the sewing result.
Connecting the foot control cord
Among the accessories you will nd the foot control cord and
the power cord. Connecting the foot control cord to the foot
control is only necessary the very rst time you are going to
use the machine.
1. Take out the foot control cord. Turn the foot control
over. Connect the cord to the socket inside the space of
the foot control. Push rmly to make sure it is properly
connected.
2. Lay the cord in the slot on the underside of the foot
control.
CONNECT THE POWER CORD AND
FOOT CONTROL
On the underside of the machine you will nd information
about the power supply voltage (V) and the frequency (Hz).
Note: Before plugging in the foot control, check to ensure that it is of type
“FR2” (see underside of foot control).
1. Connect the foot control cord to the front socket on the
bottom right side of the machine (1).
2. Connect the power cord to the rear socket on the bottom
right side of the machine (2).
3. Press the ON/OFF switch to “I” to turn on power and
light (3).
For the USA and Canada
This sewing machine has a polarized plug (one blade wider
than the other). To reduce the risk of electric shock, this
plug is intended to t in a polarized outlet only one way. If
the plug does not t fully in the outlet, reverse the plug. If
it still does not t, contact a qualied electrician to install
the proper outlet. Do not modify the plug in any way.
18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Husqvarna Designer Topaz 40 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Husqvarna Designer Topaz 40

Husqvarna Designer Topaz 40 Bedienungsanleitung - Deutsch - 104 seiten

Husqvarna Designer Topaz 40 Bedienungsanleitung - Holländisch - 104 seiten

Husqvarna Designer Topaz 40 Bedienungsanleitung - Französisch - 104 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info