Bedienungsanleitung Husqvarna Designer Topaz 40 (Seite 33 von 104) (Englisch)

609685

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

3:3SettingS & Function buttonS

3 5 64

6. SPEED + and -

SEWING MODE: All stitches in your machine have a pre-set,

maximum sewing speed. Press Speed - or Speed + to decrease

or increase the sewing speed. When touching Speed a pop-

up message on the screen will indicate the speed setting.

You can also set the speed by touching the slider in the pop-

up message. If you change the speed setting while sewing/

embroidering no pop-up message will appear.

When sewing with metallic threads, or when sewing on

delicate fabrics, lower the speed for optimal results.

EMBROIDERY STITCH-OUT: Each stitch type in a design has a

pre-set maximum speed at which it can be sewn. To reduce

the speed when using specialty threads or embroidering on

delicate fabrics, press Speed -. To increase the speed again

press Speed +.

7. Sensor Foot Up and Extra Lift

SEWING MODE: Press Sensor Foot Up to raise the presser

foot. Press it a second time and the presser foot will raise to

Extra Lift.

EMBROIDERY STITCH-OUT: Press Sensor Foot Up and Extra

Lift to lift the presser foot to Up position. Press once more

and the presser foot will raise to Extra Lift, to make it easier to

insert or remove the hoop.

8. Sensor Foot Down and Pivot

SEWING MODE: Press the Sensor Foot Down and Pivot button

and the presser foot will be completely lowered. The machine

rmly holds the fabric. Press Sensor Foot Down again to raise

the presser foot to pivot position or a oating position over

the fabric for easier placement of the fabric.

The presser foot will be lowered automatically when you start

sewing. You can also tap the foot control to lower the presser

foot.

When you stop with the needle in the down position, the

presser foot is automatically lifted to pivot position. This

function can be turned off in the SET Menu, Sewing Settings

(see page 3:10).

EMBROIDERY STITCH-OUT: Press the Sensor Foot Down

button to lower the presser foot into the Embroidery “oat”

position.

9. Reverse

For permanent reverse, press the Reverse button once

before starting to sew. The reverse indicator will be lit and

the machine sews in reverse until you press the button again

to cancel. If you press the reverse button while sewing, the

machine will sew in reverse for as long as you keep the button

pressed. The reverse indicator is lit when the reverse button is

pressed.

Reverse is also used when sewing manual buttonholes,

bartacks, darning stitches and automatic tapering to step

between the parts of the stitch.

Reverse has no function in Embroidery Mode.

EXCLUSIVE SENSOR SYSTEM

™

Thanks to the EXCLUSIVE SENSOR SYSTEM

™

feature,

the presser foot continuously senses the thickness of fabric,

whether in sewing mode or embroidery mode, and sews over

the fabric smoothly and evenly with perfect fabric feeding.

Go to the SET Menu, to see the actual setting of the Sensor

presser foot pressure for the selected fabric and adjust the

presser foot pressure.

FUNCTION BUTTONS

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Husqvarna Designer Topaz 40 Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Husqvarna Designer Topaz 40

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info