609685
63
Zoom out
Zoom in
Vorherige Seite
1/104
Nächste Seite
Program 5:3
EDIT YOUR STITCH OR LETTERING
PROGRAM
TABS IN PROGRAM MODE
There are three different tabs in Program Mode. The rst is
the Sewing Information Tab where you can make changes to
each individual stitch that you have programmed. The second
tab is the Stitch Menu Tab where you will nd all the stitches
that you can program. The third tab is the Font Menu Tab
where you can choose which font you want to use. You can
Touch & Hold on the Stitch Menu and Font Menu to open
more stitches and fonts.
Insert a Stitch or Letter
Move the cursor where you want to add a stitch or letter using
the arrows. Select the desired stitch you want to insert. It will
be placed at the cursor.
Adjust Text and Stitches
You can mirror, adjust length and width or change the density
of the selected stitch, in the same way as when in Sewing
Mode. Only the selected stitch will be adjusted.
Delete a Stitch or Letter
If you want to delete a stitch, move the cursor to the stitch
you want to delete (the selected stitch will be red) and touch
Delete. Touch & Hold Delete to delete the entire program.
Note: A straight line at the point of the Scroll Up or Down icon
indicates scroll to beginning or end.
STITCH PROGRAM COMMANDS
You can insert STOP, FIX and thread cut commands into the
stitch program. These commands will be included in the stitch
program and will always be performed when sewing it.
Move the cursor to the position where you want to add a
command using the scroll up/down arrows. Touch the button
or an icon on screen and it will be added into the programmed
stitch. This conrms that the command is inserted and it also
shows where the command will be performed in the stitch
program.
Delete
Mirror End to
End
Mirror Side
to Side
Stitch Length
Stitch width
Font Menu
Stitch Menu
Sewing Information
63

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Husqvarna Designer Topaz 40 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Husqvarna Designer Topaz 40

Husqvarna Designer Topaz 40 Bedienungsanleitung - Deutsch - 104 seiten

Husqvarna Designer Topaz 40 Bedienungsanleitung - Holländisch - 104 seiten

Husqvarna Designer Topaz 40 Bedienungsanleitung - Französisch - 104 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info