609685
72
Zoom out
Zoom in
Vorherige Seite
1/104
Nächste Seite
6:6
6. Clear sufcient space around the machine to accommodate
movement of the embroidery arm and the hoop. Hold the
needle thread and touch the Start/Stop button or the foot
control. The machine starts embroidering.
Note: This machine features Automatic Jump Stitch Trim. When
activated the machine trims the top jump stitch threads and pulls the
thread ends to the underside of the fabric. The default setting is on.
To turn it off, go to the SET Menu, Embroidery Settings and deselect
Automatic Jump Stitch Trim. Read more about Automatic Jump Stitch
Trim in chapter 3.
If Automatic Jump Stitch Trim is not activated the
machine will stop after stitching a few stitches. A pop-
up message will appear on the screen asking you to cut
the thread end. Cut the thread and press Start/Stop to
continue embroidering.
7. When the rst color is completed, your machine cuts the
top thread and stops. A pop-up message appears asking
you to change thread color. Re-thread with the next color
and continue embroidering by pressing Start/Stop. Hold
the thread end. The machine will trim the top thread end
and you can pull it loose.
At the end of each color block, the thread is tied off and
the needle thread is cut.
8. When the embroidery is completed, your machine cuts the
top thread and bobbin thread and stops. The needle and
presser foot raise automatically for easy removal of the
hoop.
A pop-up message and sound informs you that your
embroidery is nished. Touch OK to keep the design
loaded and stay in Embroidery Stitch-Out.
72

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Husqvarna Designer Topaz 40 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Husqvarna Designer Topaz 40

Husqvarna Designer Topaz 40 Bedienungsanleitung - Deutsch - 104 seiten

Husqvarna Designer Topaz 40 Bedienungsanleitung - Holländisch - 104 seiten

Husqvarna Designer Topaz 40 Bedienungsanleitung - Französisch - 104 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info