518052
11
Zoom out
Zoom in
Vorherige Seite
1/64
Nächste Seite
~ 9 ~
2
1
2
3
4
2. Set Up Your Machine
UNPACK THE MACHINE
Unpack the machine and place it on a Á at table. Be sure to
wipe off any surplus oil from stitch plate area before using
your machine the À rst time.
CONNECT THE POWER CORD
AND FOOT CONTROL
Among the accessories you will À nd the power cord and the
foot control.
Note: Before plugging in the foot control, check to ensure that it is type
“YC-485 EC or Model JF-1000” (see underside of foot control).
1. Connect the foot control cord to the front socket on the
bottom right side of the machine (1).
2. Connect the power cord to the rear socket on the
bottom right side of the machine (2) and your wall
outlet (3) as illustrated.
3. Press the ON/OFF switch to ON (|) to turn on power
and light (4).
Note: In sewing mode, the machine can be operated either with or
without the foot control (see page 21).
PACK AWAY AFTER SEWING
1. Press the ON/OFF (4) switch to OFF (O).
2. Unplug the cord from the wall socket (3) and then from
the machine (2).
3. Unplug the foot control cord from the machine (1).
4. Place all accessories in the accessory tray. Slide the tray
onto your machine around the free arm.
PRESSER FOOT LIFTER
There are three positions for your presser foot.
1. Lower the presser foot to sew.
2. Raise the lifter to the middle position to insert or remove
fabric.
3. Lift it to its highest position to change the presser foot
or to insert or remove thick fabric.
ON/OFF switch
“OFF”
ON/OFF
switch “ON”
Set Up Your Machine
For the USA and Canada:
This sewing machine has a polarized plug (one blade
wider than the other). To reduce the risk of electric
shock, this plug is intended to À t in a polarized outlet
only one way. If the plug does not À t fully in the outlet,
reverse the plug. If it still does not À t, contact a qualiÀ ed
electrician to install the proper outlet. DO NOT modify
the plug in any way!
11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Husqvarna H Class 600E wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Husqvarna H Class 600E

Husqvarna H Class 600E Bedienungsanleitung - Deutsch - 64 seiten

Husqvarna H Class 600E Bedienungsanleitung - Französisch - 64 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info