518052
22
Zoom out
Zoom in
Vorherige Seite
1/64
Nächste Seite
~ 20 ~
6
7
8
Decrease tension Increase tension
6. TWIN NEEDLE SAFETY
When using twin needles, press the twin needle safety
button regardless of the stitch you selected. Doing so
will reduce the stitch width automatically and save broken
needles and possible damage to your machine.
When the button is pressed, the LED indicator next to the
button is lit, indicating that Twin Needle Safety is activated.
When turning the Stitch Selection Dial, the machine now
automatically skips all stitches that are not suitable for twin
needle, and a beep will sound when selecting buttonhole
pattern with the direct selection button, indicating that
buttonholes cannot be sewn with twin needle.
Well balanced
Top tension
too tight
Top tension
too loose
Note: Always select the Twin Needle Safety prior to selecting a pattern. This will preclude any possibility of the twin needle breaking.
To disengage Twin Needle Safety and return the machine to normal sewing mode, either press the Twin Needle Safety button again or
turn the machine off. Twin Needle Safety is only active when the LED light next to the Twin Needle button is lit.
7. THREAD CUTTING MODE
Press this button to activate Thread Cutting Mode. The
machine will automatically cut the top and bobbin thread
every time you stop sewing. When activated, the LED
indicator next to the button is lit.
Note: Twin needle safety and Thread cutting mode cannot be enabled
at the same time.
8. THREAD TENSION CONTROL BUTTON
Press - to decrease and + to increase thread tension. While
pressing the button, thread tension adjustment mode is
displayed on LCD screen.
ADJUST TOP THREAD TENSION
The correct appearance of your stitching is mainly
determined by the balanced tension of both top and bobbin
threads. The tension is well balanced when these two
threads ‘lock’ in the middle of layers of the fabric you are
using.
The thread tension is set automatically when a stitch is
selected. If, when you start to sew, you realize that the
stitching is irregular, the thread tension needs to be adjusted.
Make any adjustments of the thread tension with the presser
foot lowered.
Bobbin Tension
The bobbin tension has been correctly set at the factory, so
you do not need to adjust it.
Under side
Top side
22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Husqvarna H Class 600E wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Husqvarna H Class 600E

Husqvarna H Class 600E Bedienungsanleitung - Deutsch - 64 seiten

Husqvarna H Class 600E Bedienungsanleitung - Französisch - 64 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info