Bedienungsanleitung Husqvarna LC 141C (Seite 25 von 560) (Alle Sprachen)

733907

Zoom out

Zoom in

Vorherige Seite

1/560

Nächste Seite

Transportation, storage and disposal

To set the product in transport position

1. Remove the grass catcher (if installed).

2. Loosen the knobs on the upper handle and fold the

handle down.(Fig. 70 )

3. Loosen the lower knobs.

4. Move the knobs to the lower end of the grooves on

the left and the right side of the product.(Fig. 71 )

5. Fold the handle forward.(Fig. 72 )

Transportation

• The Dangerous Goods Legislation requirements

apply to the contained Li-ion batteries.

• For commercial transports special requirements on

package and labels must be obeyed.

• Make sure that you obey the regulations for

dangerous material when you prepare the product

for transport. Local regulations can apply.

• Always remove the battery for transport.

• Put tape on the battery connectors and make sure

that the battery cannot move around during

transport.

• Attach the product during transport.

Storage

• Always remove the battery for storage.

• To prevent accidents, make sure that the battery is

not connected to the product during storage.

• Keep the battery charger in a closed and dry space.

• Keep the battery and the battery charger in a dry

space where there is no moisture or frost.

• Disconnect the battery from the battery charger

during storage.

• Do not keep the battery where static electricity can

occur. Do not keep the battery in a metal box.

• Keep the battery where the temperature is between

5°C and 25°C and out of sunlight.

• Keep the battery charger where the temperature is

between 5°C and 45°C and out of sunlight.

• Make sure that the battery is charged to 30% - 50%

before you put it in storage for long periods.

• Keep the product, battery and battery charger in a

locked area out of reach for children and not

approved persons.

• Clean the product and do a complete servicing

before you put the product in storage for a long time.

Disposal

Symbols on the product or the packaging of the product

indicate that this product cannot be handled as domestic

waste. It must be submitted to an appropriate recycling

station for the recovery of electrical and electronic

equipment.

By ensuring that this product is taken care of correctly,

you can help to counteract the potential negative impact

on the environment and people that can otherwise result

through the incorrect waste management of this product.

For more detailed information about recycling this

product, contact your municipality, your domestic waste

service or the shop from where you purchased the

product.

(Fig. 73 )

Technical data

Technical data LC 141VLi, LC 141Li

LC 141VLi LC 141Li

Cutting motor

Motor type BLDC (brushless) 36V BLDC (brushless) 36V

Motor speed – SavE, rpm 2700 2700

Motor speed – Nominal, rpm 3100 3100

Motor speed – High load, rpm 3700 3700

Motor output – max. kW 0.8 0.8

Motor output – Nominal, kW 0.55 0.55

Drive motor

Motor output – Nominal, kW 0.25 NA

Self walk speed, km/h 3.0–4.5 NA

71 - 005 - 18.05.2018 25

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Husqvarna LC 141C Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info