Bedienungsanleitung Husqvarna LC 448Se (Seite 6 von 124) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

579216

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

CHINE´S SAFETY EQ

UIPMENT

–

English

General

This section descr

ibes the machine´s safety equipment,

its pur

pose, and how checks and maintenance should be

carried out to ensure that it operates correctly.

Cutting co

ver

•

The cutting cover is designed to reduce vibration and

to reduce the r

isk of cuts.

Chec

king the cutting cover

•

Make sure the cutting cover is not damaged and that

there are no visib

le defects such as cracks.

Gear housing

•

The protective cover is designed to reduce the risk of

ush injuries and to catch a broken drive belt.

Chec

king the gear housing

•

Check that the protective cover is undamaged and

that it is proper

ly secured.

Engine brake handle

•

The engine brake is designed to stop the engine.

When the g

rip on the engine brake handle is released

the engine should stop.

Chec

king the engine brake handle

•

Apply full throttle and then release the brake handle.

The engine should stop and the dr

ive should

disengage. The engine brake should always be

adjusted so that the engine stops within 3 seconds.

Vibration damping system

•

Your machine is equipped with a vibration damping

system that is designed to minimiz

e vibration and

make operation easier.

• The handlebar system's steel tube and the cutting

ver are designed to minimise the vibrations from the

engine. This model also has 4 vibration dampers ﬁtted

on the handlebar unit to further reduce vibrations.

Chec

king the vibration damping system

•

Check that the handles and vibration damping

elements are not damaged.

Mufﬂ

•

The mufﬂer is designed to keep noise levels to a

minim

um and to direct exhaust fumes away from the

user.

Inspecting the m

ufﬂer

•

Check regularly that the mufﬂer is complete and

secured correctly.

ARNING! Never use a machine that has

faulty safety equipment! If your machine

fails any checks contact your service

agent to get it repaired.

Prevent unintentional starting by

removing the ignition cable from the

spark plug.

ARNING! Overexposure to vibration

can lead to circulatory damage or nerve

damage in people who have impaired

circulation. Contact your doctor if you

experience symptoms of overexposure

to vibration. Such symptoms include

numbness, loss of feeling, tingling,

pricking, pain, loss of strength, changes

in skin colour or condition. These

symptoms normally appear in the

ﬁngers, hands or wrists. These

symptoms may be increased in cold

temperatures.

ARNING! Never use a machine without

a mufﬂer, or with a faulty mufﬂer. A

damaged mufﬂer may substantially

increase the noise level and the ﬁre

hazard. Keep ﬁre ﬁghting equipment

handy.

The mufﬂer gets very hot during and

after use. This also applies during idling.

Be aware of the ﬁre hazard, especially

when working near ﬂammable

substances and/or vapours.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Husqvarna LC 448Se Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info