Bedienungsanleitung Husqvarna OPAL 670 (Seite 55 von 64) (Englisch)

510452

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

Sewing – 55

QUILTING

A quilt usually consists of three layers, two layers of fabric with a layer of batting sandwiched between. To sew three layers

together, you have a wide variety of stitches and techniques to choose from. When the quilting is ﬁ nished simply bind the edges

or make it into cushions, wearable art or other smaller projects.

Crazy Quilt Stitching

Embellish your quilt with decorative stitches. The stitches can be sewn

in a coordinating or contrasting color. Decorative threads like rayon

embroidery or heavy cotton threads are sometimes used. Find stitches

perfect for crazy quilting on Stitch Menu 2.

Hand-look Quilting

Simulate the look of handmade qulting with invisible thread and the

Hand-look Quilting stitch (2:2). Thread the needle with clear invisible

thread and the bobbin with a color of thread that coordinates with

your fabric.

To get the accurate hand stitched look it is important that the stitch

is sewn using a high thread tension. Make sure to set the tension

according to the recommendations on the GraphicDisplay (650) (on

the 670, the thread tension is set automatically).

Stitch along one of the seams of your project. The handlook effect is

created as the bobbin thread is pulled up to the top of the quilt.

Note: When sewing with the hand-look quilting stitch, the result depends on

what fabric, batting and thread you are using. Be sure to try the stitch on a

sample ﬁ rst. Adjust the thread tension as needed for your project.

Free Motion Quilting

Free-motion quilting not only keeps the top, batting and backing

together, but it also adds texture and interest to your quilt.

There are several techniques to use when free motion quilting.

Decorate your quilt as you like, only your imagination sets the limits.

Two free motion techniques are stippling and circles.

Free motion stippling is typically a tightly and evenly spaced

meandering stitch line. When stippling, draw squiggles with the needle

as you sew. Another technique is to make circular motions on the

fabric as you sew creating a stone shaped pattern.

Free-motion quilting is done with the feed teeth lowered. You move

the fabric manually to determine the stitch length. When free motion

quilting, use the Open Toe Free Motion Spring Foot (Optional

Accessory, part number 4130376-46).

Begin by basting your quilt through all layers, starting from the center

of your quilt and working out.

1. Attach the Open Toe Free Motion Spring Foot and lower the feed

teeth. Select Needle Up/Down to put the needle in down position.

2. Sew at a constant medium speed, moving the fabric randomly,

this will help to keep the stitches even. The length of the stitch is

created as you move the fabric.

Tip! Practice free motion sewing on scraps of the fabric and

batting from your quilt. It is important to move your hands at

the same speed as the needle to prevent stitches that are too long

or too short. Maintaining a consistent speed while free-motion

sewing will also help keep stitches even.

Free motion stippling Free motion with circular

motions

Open Toe Free Motion Spring Foot

(Optional Accessory, part number 4130376-46)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Husqvarna OPAL 670 Seite 55

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Husqvarna OPAL 670

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info