Bedienungsanleitung Husqvarna Opal 690Q (Seite 43 von 68) (Englisch)

609737

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

Operating your Opal

™

670/690Q sewing machine – 41

SET MENU

You can change the pre-set machine settings and make manual adjustments to the automatic functions in the SET Menu. Open

the menu by touching the SET Menu icon (A). To activate a function, touch to place an X in the box. To cancel the function,

touch again to leave the box empty. For some functions, a pop-up window opens for further selection. Touch the SET Menu icon

again to close the SET Menu.

Presser foot pressure (690Q)

Use the up/down arrow buttons if you want to adjust the

presser foot pressure for the selected stitch. The value can

be adjusted between 0 and 8.5 in steps of 0.5. Your manual

setting will be cancelled when you select another stitch or turn

off the machine.

Note: When you save a stitch or program in My Stitches the setting of

the presser foot pressure is also saved.

Pivot height (690Q)

If Free Motion is activated you will be able to set the height

of the presser foot pivot position. The pivot position can be

raised or lowered in 15 steps by pressing the left/right arrow

buttons.

Skipped stitches can occur if your fabric moves up and down

with the needle as you are stitching. Lowering the pivot height

will reduce the space between the presser foot and the fabric and

eliminate the skipped stitches.

Note: Be careful not to reduce the pivot height too much. The fabric must

still move freely under the presser foot.

Sensor Foot auto (690Q)

Press the OK button to turn on or off the automatic pivot

function for lifting the presser foot for example when stopping

with the needle down. The setting will go back to default when

the machine is turned off.

Twin Needle

If you are using a twin needle, set the size of the needle to

limit the width of all stitches and prevent needle breakage.

Touch the twin needle function to open a pop-up window.

Touch the box next to the twin needle size you are using to

make your selection.

Your setting will be saved also when the machine is turned off.

A pop-up message reminds you of the setting when you turn

on the machine. Close the pop-up message by pressing OK.

Note: You cannot set the twin needle size if the Stitch Width Safety

is on, or turn on the Stitch Width Safety if the machine is set for twin

needle.

Stitch Width Safety

Touch to turn on the Stitch Width Safety when using a straight

stitch needle plate or a straight stitch presser foot (optional

accessories).

The stitch width will be limited to zero for all stitches to

prevent damage to the needle, presser foot and needle plate.

This setting is saved when the machine is turned off. A pop-

up message reminds you of the setting when you turn on the

machine.

Free Motion Floating* (690Q)

To sew in free motion with the included Embroidery/

Darning Foot R or with any optional Free Motion Floating

presser foot, set the machine in Free Motion Floating Mode.

In Sewing Mode the drop feed teeth recommendation will be

activated. The setting remains when the machine is turned off.

A pop-up reminds you of the setting when you turn on the

machine. Close the pop-up message by pressing OK.

Note: You cannot set the machine in Free Motion Floating Mode if Free

Motion Spring Action is activated or vice versa.

Free Motion Spring Action** (690Q)

If you are using any of the optional Free Motion Spring

Action presser feet, you need to set the machine in Free

Motion Spring Action Mode. In Sewing Mode the drop feed

teeth recommendation will be activated. The setting remains

when the machine is turned off. A pop-up message reminds

you of the setting when you turn on the machine. Close the

pop-up message by pressing OK.

*Free Motion Floating

When you are sewing free motion at low speed the

foot will raise and lower with each stitch to hold the

fabric on the stitch plate while the stitch is being

formed. When sewing in high speed, the foot oats

over the fabric while sewing. The feed teeth must

be lowered and the fabric is moved manually. All

stitches can be sewn in Free Motion Mode.

**Free Motion Spring Action

The Free Motion Spring Action presser feet follows

the up and down movement of the needle with

help of the spring and the arm on the presser foot.

The feed teeth must be lowered and the fabric is

moved manually. It is recommended to turn on the

Stitch Width Safety for the presser feet that are only

intended for straight stitch sewing.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Husqvarna Opal 690Q Seite 43

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Husqvarna Opal 690Q

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info