Bedienungsanleitung Husqvarna P 520D - 2015 (Seite 19 von 48) (Englisch)

595368

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

English – 19

OPERATING

Work safety

• Make sure nobody else is in the vicinity of the machine

when you start the engine, engage the drive or drive off.

• Clear the area of objects such as stones, toys, wires, etc.

that may become caught in the blades and be thrown out.

• Look out for the ejector and do not direct it towards

anyone.

• Always look downwards and backwards before and while

reversing. Keep watch for both large and small obstacles.

• Slow before cornering.

• Switch off the blades when you are not mowing.

• Take care when rounding a ﬁxed object, so that the blades

do not hit it. Never run the machine over foreign objects.

• Only use the machine in daylight or in other well-lit

conditions. Keep the machine at a safe distance from

holes or other irregularities in the ground. Pay attention to

other possible risks.

• Never use the machine if you are tired, if you have

consumed alcohol, if you are taking other drugs or

medication that can affect your vision, judgement or co-

ordination.

• Never use the machine in bad weather, for instance in fog,

in rain, damp or in wet locations,strong winds, intense

cold, risk of lightning, etc.

• Keep an eye on the trafﬁc when working close to a road or

when crossing it.

Instrument panel

The indicator lights are on the steering console under the

steering wheel.

1 Temperature gauge for coolant *

2 Oil pressure, check oil level and top up if necessary.

3 Indicates glow plug heating

4 Charge the battery.

5 Controls for driving the cutting unit blades activated

6 The parking brake is applied.

7 Spotlight activated

* Temperature gauge for coolant. The engine is liquid cooled.

If overheating of the engine is indicated the ﬁrst action to take

is to reduce the engine temperature by running the engine at

idle with no load. Turn off the power transmission Check

coolant level and top up if necessary. Also check that the

radiator grill and radiator are clean and not clogged. The grill

is at the rear of the machine and on top of the bonnet.

Driving the Rider

• Release the parking brake before driving

• When driving the throttle control must be in the position for

maximum engine speed, work mode.

• Carefully press down one of the pedals until the required

speed is obtained. Pedal (1) is used to drive forwards, and

pedal (2) to drive backwards.

(P 525D)

The forward pedal has a catch that can be foot operated.

When the catch is in full-speed position (2), the driver can fully

depress the forward pedal. For more information, please see

'Speed Control'.

123456

WARNING! Make sure that branches do not

obstruct the pedals when mowing under

bushes.

Localise and mark stones and other ﬁxed

objects to avoid collision.

WARNING! Do not use the Rider on ground

that slopes more than 10

°. Mow slopes

upwards and downwards, never across.

Avoid sudden changes in direction.

8095-306

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Husqvarna P 520D - 2015 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Husqvarna P 520D - 2015

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info