Bedienungsanleitung Husqvarna P520D (Seite 4 von 52) (Englisch)

477553

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

–

English

INTR

ODUCTION

Dear Customer

Thank y

ou for choosing a Husqvarna Rider. Husqvarna Riders are built to a unique design with a front-mounted cutting unit and a

patented articulated steering. Riders are designed for maximum efﬁciency even in small or conﬁned areas. The closely grouped

controls and pedal-operated hydrostatic transmission also contribute to the performance of this machine.

This operator’s manual is a valuable document. By following its instructions (on operation, service, maintenance, etc.) you will

signiﬁcantly extend the life of the machine and even its second-hand value.

When you sell your Rider, make sure you pass on the operator’s manual to the new owner.

The last chapter in the operator’s manual consists of a Service Journal. Make sure that all service work and repairs are recorded.

A well-documented service history reduces the costs of seasonal maintenance and inﬂuences the second-hand value of the

machine. Bring the operator’s manual with the Rider when bringing it to a workshop for service procedures.

Driving and transpor

t on public roads

Chec

k the relevant road trafﬁc regulations before driving the machine on a public road. If transporting the machine on another

vehicle always use approved securing devices and make sure that the machine is securely held.

owing

When y

our machine is equipped with a hydrostatic transmission you should only tow the machine over short distances and at a

low speed, otherwise there is a risk of damaging the transmission.

The transmission must be disengaged when towing, see instructions under the heading Bypass valves.

Use

This r

ide-on mower is designed to mow grass on open and level ground surfaces. In addition, there is a number of accessories

recommended by the manufacturer that broadens the application area. Please contact your dealer for more information about

which accessories are available. The machine may only be used with the equipment recommended by the manufacturer. All other

types of use are incorrect. Compliance with and strict adherence to the conditions of operation, service and repair as speciﬁed by

the manufacturer also constitute essential elements of the intended use.

This machine should be operated, serviced and repaired only by persons who are familiar with its particular characteristics and

who are acquainted with the relevant safety procedures.

Accident prevention regulations, all other generally recognised regulations on safety and occupational medicine, and all road trafﬁc

regulations must be observed at all times.

Any arbitrary modiﬁcations carried out to this machine may relieve the manufacturer of liability for any resulting damage or injury.

IMPOR

TANT INFORMATION

The transmission guarantee is only valid if the synchronisation of the front and rear wheels has

been checked and adjusted in compliance with the service schedule. The system will be damaged if synchronisation is not

carried out.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Husqvarna P520D Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Husqvarna P520D

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info