Bedienungsanleitung Husqvarna P525D (Seite 12 von 208) (Englisch, Italienisch, Portugiesisch, Spanisch)

477554

Zoom out

Zoom in

Vorherige Seite

1/208

Nächste Seite

WARNING: Read the warning instructions

that follow before you use the product.

• Do not fill the fuel tank indoors.

• Diesel and diesel fumes are poisonous and very

flammable. Be careful with diesel to prevent injury or

fire.

• Do not remove the fuel tank cap or fill the fuel tank

when the engine is on.

• Let the engine become cool before you refuel.

• Do not smoke when you fill fuel.

• Do not fill fuel near sparks or naked flames.

• If there are leaks in the fuel system, do not start the

engine until the leaks are repaired.

• Do not fill above recommended fuel level. The heat

from the engine and the sun makes the fuel expand

and the fuel overflows if the tank is filled too much.

• Do not fill too much. If you spill fuel on the product,

clean up the spill and wait until it is dry before you

start the engine. If you spill on your clothing, change

it.

• Store fuel in approved containers only.

• Store the product and fuel in such a way that there is

no risk that fuel leaks or fumes can cause damage.

• Drain off the fuel in an approved container outdoors

and away from naked flames.

Battery safety

WARNING: A damaged battery can cause

an explosion and cause injury. If the battery

has a deformation or is damaged, speak to

an approved Husqvarna service agent.

WARNING: Read the warning instructions

that follow before you use the product.

• Use protective glasses when you are near batteries.

• Do not wear watches, jewelry or other metal objects

near the battery.

• Keep the battery out of reach for children.

• Charge the battery in a space with good airflow.

• Keep flammable materials at a minimum clearance

of 1 m when you charge the battery.

• Discard replaced batteries. See

Disposal on page

• Explosive gases can come from the battery. Do not

smoke near the battery. Keep the battery away from

open flames and sparks.

Transport safety

• Use an approved transport vehicle for transportation

of the product.

• A markets national or local regulations can set limit

to the transportation of the product.

• The operator of the transport vehicle is responsible

to attach the product safely during transport.

Safety instructions for maintenance

WARNING: The product is heavy and can

cause injury or damage to property or the

adjacent area. Do not do maintenance on

the engine or the cutting deck without these

conditions:

• The engine is off.

• The product is parked on a level surface.

• The parking brake is applied.

• The ignition key is removed.

• The cutting deck is disengaged.

• The ignition cables are removed from the

plugs.

WARNING: The exhaust fumes from the

engine contain carbon monoxide, an

odourless, poisonous and very dangerous

gas. Do not run the product in closed spaces

or spaces with not sufficient air flow.

WARNING: Read the warning instructions

that follow before you use the product.

• For best performance and safety, do maintenance

on the product regularly as given in the maintenance

schedule. See

Maintenance schedule on page 24

• Electrical shocks can cause injuries. Do not touch

the cables when the engine is on. Do not do a

function test on the ignition system with your fingers.

• Do not start the engine if the protective covers are

removed. There is a high risk of injury caused by

moving or hot parts.

• Let the product become cool before you do

maintenance near the engine.

• The blades are sharp and can cause cuts. Wind

protection around the blades or use protective

gloves when you do work on the blades.

• Always put the cutting deck in servicing position to

clean it. Do not park the product near the edge of a

ditch or slope to get access to the cutting deck.

CAUTION: Read the caution instructions

that follow before you use the product.

• Do not turn over the engine if the spark plug or

ignition cable is removed.

• Make sure that all nuts and bolts are tightened

correctly and that the equipment is in good condition.

• Do not change the adjustment of governors. If the

engine speed is too high, the product components

can become damaged. See

Technical data on page

for highest permitted engine speed.

740 - 004 -

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Husqvarna P525D Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Husqvarna P525D

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info