Bedienungsanleitung Husqvarna Platinum 3000 (Seite 29 von 34) (Englisch)

517444

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

Achieving good stitch quality

Understanding how your long arm machine makes a stitch will help you make the proper adjustments

to make the perfect stitch. The technique all long arm machines use to make a stitch is different then

the home sewing machine. The home sewing machine is designed to press together two layers of

fabric and sew while the fabric is held in place by the presser foot. Long arm machines are designed

to press and sew multiple layers together while the machine is moving. The difference is that there is

practically no needle deection on a standard sewing machine and a large amount of needle

deection on the long arm. The higher the tension, the more the needle will deect.

Good stitches will interlock in the batting between the quilt top and backing. In real life, this goal is

rarely achieved. For this reason, you need to be aware that you will have “pokies” if you use different

colors of thread on top and in the bobbin. Pokies are where you can see tiny dots of the contrasting

thread where the bobbin catches the top thread. If there is slightly more tension on the top than on

the bottom, then you will see the pokies on the top side of the quilt. If the greater tension is on the

bobbin, then you will see the pokies on the back of the quilt. If the pokies are objectionable to you,

use the same color thread on both top and bottom.

TIP: A general rule of thumb is that if the stitch looks bad on the top it is the bottom tension.

If the stitch looks bad on the bottom it is the upper tension. The upper and lower threads play

tug of war with each other.

Tension

You need correct tension on the top and bottom threads, but you must also have correct tension on

the quilt held between the rails. You should have a small amount of “sag” in your fabric. This allows

enough movement of your quilt layers for the needle to penetrate and make good stitches.

Before you start making adjustments to your machine ask yourself, “What changed?” If your machine

was stitching great and all of a sudden it has loopies on the back or puckers, “What changed?” Did

you just change the bobbin? Did you just lift the take up rail? Did you lower the take up rail after

nishing your last quilt? Did you recently change the needle? Did you just roll the quilt?

If the take up rail with the quilted portion of your quilt is too high, it will result in poor stitch quality. You

need a nger tip space between the quilt and the machine bed. Higher will result in poor stitch

quality, too low and the quilt will create a drag on your machine’s movement.

Look at your bobbin, a sloppy wound bobbin will not create a good stitch. Make sure that the threads

on the bobbin are snug and evenly wound. Check to see if there is a piece of lint in the bobbin case.

TIPS & TROUBLESHOOTING

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Husqvarna Platinum 3000 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info