Bedienungsanleitung Husqvarna SAPPHIRE 850 (Seite 29 von 48) (Englisch)

518161

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

Operating the machine

Twin needle

If you are using a twin needle, set the size of the needle to limit

the width of all stitches and prevent needle breakage. Use the

left/right arrow buttons to set the twin needle size. Your setting

will be saved even when the machine is turned off. A pop-

up message reminds you of the setting when you turn on the

machine. Close the pop-up message by pressing OK.

NOTE: You cannot set the twin needle size if the stitch

width safety is on, or turn on the stitch width safety if the

machine is set for twin needle.

Stitch Width Safety

Use the left/right arrow buttons to turn on the Stitch Width

Safety when using a straight stitch needle plate or a straight

stitch presser foot. The stitch width will be limited to zero for all

stitches to prevent damage to the needle, presser foot and needle

plate. This setting is saved when the machine is turned off. A

pop-up message reminds you of the setting when you turn on the

machine. Close the pop-up message by pressing OK.

Buttonhole balance

If the Sensor Buttonhole Foot is not connected or if you select

stitch no. 1:25, the columns in the buttonhole stitch will be

sewn in different directions. On some fabrics this may cause

the columns to appear with different density. Use the left/right

buttons to balance the density between -7 and 7. When the

balance is set to default the ﬁ gures will be black. If you change

the value, the ﬁ gures will be inverted on a black background.

Free Motion Floating*

To sew in free motion with the included Embroidery/Darning

Foot R or with any optional Free Motion Floating presser foot,

set the machine in Free Motion Floating mode. The drop feed

teeth recommendation will be activated. The setting remains

when the machine is turned off. A pop-up reminds you of the

setting when you turn on the machine. Close the pop-up message

by pressing OK.

Free Motion Spring Action**

If you are using any of the optional Free Motion Spring Action

presser feet, you need to set the machine in Free Motion Spring

Action mode. The drop feed teeth recommendation will be

activated. The setting remains when the machine is turned off. A

pop-up message reminds you of the setting when you turn on the

machine. Close the pop-up message by pressing OK.

Audible Alarm

Turns on or off all alarm sounds of the machine. Default setting

is on. This setting is saved even if the machine is turned off.

Contrast

Adjust the contrast of the GraphicDisplay by using the left/right

arrow buttons. The value can be set between –20 to 20 in steps

of 1. The setting is stored even when the machine is turned off.

*Free Motion Floating

When you are sewing free motion in low speed the

foot will raise and lower with each stitch to hold the

fabric on the stitch plate while the stitch is being

formed. When sewing in high speed, the foot ﬂ oats

over the fabric while sewing. The feed teeth must be

lowered and the fabric is moved manually.

All stitches

can be sewn in free motion mode.

**Free Motion Spring Action

The Free Motion Spring Action presser feet follows

the up and down movement of the needle with help

of the spring and the arm on the presser foot. The

feed teeth must be lowered and the fabric is moved

manually. It is recommended to turn on the Stitch

Width Safety for the presser feet that are only intended

for straight stitch sewing.

Language

Use the left/right arrow buttons to change the language of all

text in your machine. The language setting is saved even if the

machine is turned off.

Software Version

Here you can see the current loaded software version for the

sewing machine.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Husqvarna SAPPHIRE 850 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info