510448
33
Zoom out
Zoom in
Vorherige Seite
1/56
Nächste Seite
33
2
Operating the machine
Main motor overload
If you are sewing on very heavy fabric or if the machine is
blocked when sewing, the main motor can get overloaded. The
pop-up message will close when the main motor and power
supply is secure.
The stitch cannot be programmed
This message is shown if you try to program or add a buttonhole,
bartack or Automatic Tapering stitches* or the sew on button
stitch to a program. All stitches in your sewing machine are
programmable except for these. Close the pop-up message by
pressing the OK button.
The stitch cannot be saved
This message is shown if you try to save a buttonhole, bartack,
darning or Automatic Tapering stitches* or the sew on button
stitch to My Stitches. All stitches in your machine can be saved
in My Stitches except for these. Close the pop-up message by
pressing the OK button.
Program too long to add more stitches
If you try to add more than 40 stitches or letters in the same
program this message is shown. Close the pop-up message by
pressing the OK button.
NOTE: If you add a FIX, STOP or a Selective Thread
Cut* to the program these will each use one memory
space in the program.
The combination of commands is incorrect
If you are programming stitches or letters and try to insert any of
the commands STOP, FIX or Selective Thread Cut* into a stitch
program in an order that is not allowed, this message will appear.
Close the pop-up message by pressing the OK button.
Commands removed from program
If you try to insert a previously saved program into a new one or
if you are using the mirroring end to end function* on the whole
program, the result may be that the commands are put in an order
that is not allowed. To avoid this, the commands will be removed
from the program. Close the pop-up message by pressing the OK
button.
*Only on 875 Quilt
33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Husqvarna SAPPHIRE 875 Quilt wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Husqvarna SAPPHIRE 875 Quilt

Husqvarna SAPPHIRE 875 Quilt Bedienungsanleitung - Deutsch - 56 seiten

Husqvarna SAPPHIRE 875 Quilt Bedienungsanleitung - Holländisch - 56 seiten

Husqvarna SAPPHIRE 875 Quilt Bedienungsanleitung - Französisch - 56 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info