Bedienungsanleitung Husqvarna Sapphire 875 (Seite 41 von 56) (Englisch)

510451

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

Basic sewing techniques

Sewing buttonholes

The buttonholes in your sewing machine are specially adjusted

for different kinds of fabric and garments. Look at the stitch

table on the last pages in this book to À nd descriptions of each

buttonhole.

The Exclusive SEWING ADVISOR™ feature will select the best

buttonhole and stitch settings for your fabric. Fabric should be

interfaced and/or stabilized where buttonholes are to be sewn.

Automatic One-Step Sensor Buttonholes

When you select a buttonhole stitch with the Sensor One-Step

Buttonhole Foot connected, you will be able to set the size of

the button on the GraphicDisplay using the up and down arrow

buttons. When sewing, your sewing machine automatically

sews the buttonhole long enough to À t the selected button size.

Because the Sensor One-Step Buttonhole Foot measures as it

sews, every buttonhole will be the same size.

NOTE: The buttonhole size will vary with the thickness

and style of your button. Always stitch a sample

buttonhole on scrap fabric À rst.

1. Attach the Sensor One-Step Buttonhole Foot.

2. Plug the cord into the socket above the needle area, behind

the light bulb.

3. Measure the button diameter using the button measuring

chart on the front of the machine.

4. Use the up and down arrow buttons to set the button size on

the GraphicDisplay. The size can be set between 0-50 mm.

5. Place the fabric and stabilizer under the Sensor One-Step

Buttonhole Foot. The measurement wheel can be raised by

lifting it, which makes it easier to place the fabric under the

presser foot. Use the markings on the left toe of the Sensor

One-Step Buttonhole Foot to position the garment edge.

Place the edge of the garment at the middle mark to have

5/8’’ (15 mm) from the edge to the buttonhole.

6. Before sewing, line up white area on the side of the red wheel

with the white marking line on the foot.

7. Step on the foot control. The Sensor One-Step Buttonhole

Foot lowers automatically. A straight stitch is sewn away

from you stabilizing the left buttonhole column, then the

satin column is sewn toward you. This is repeated for the

right column. The bartacks are also sewn automatically.

The arrows on the GraphicDisplay will show when each

part of the buttonhole is sewn and in what direction. Keep

the foot control depressed until the buttonhole is À nished.

The machine will stop automatically when the buttonhole is

complete.

1:0, 1:23, 1:25, 1:26, 1:27 Buttonhole Stitches

Fabric: All types of fabric.

Select: The fabric you are using and the

Buttonhole technique (The Exclusive

SEWING ADVISOR™ feature selects a

buttonhole suitable for your fabric).

Use: The Sensor One-Step Buttonhole Foot

and the needle recommended for your fabric.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Husqvarna Sapphire 875 Seite 41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Husqvarna Sapphire 875

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info