518170
17
Zoom out
Zoom in
Vorherige Seite
1/64
Nächste Seite
17
Functions and InfoDisplay
Stitch length
When you select a stitch, the
machine will automatically set
the best stitch length which will
be indicated by numbers on the
Infodisplay. You can change the stitch
length by pressing either the (+) or (-)
button. Certain stitches have a limited
stitch length. Not active in REP
position.
When sewing embroideries the
length can be set between 2 and 6
to change size of embroidery.
STOP
The STOP button is used to
À nish a stitch. i.e. the machine
fastens the thread and stops
automatically when the stitch
has been completed. The symbol
on the display indicates that STOP is
selected. STOP is cancelled when you
press the button again or by selecting a
new stitch.
The button has the same function both
in NORM and REP position.
(See "Satin taper...", page 24, STOP,
page 23.
Embroidery sewing without thread
color change, see page 34.
Mirror image
You can mirror a stitch by using
the buttons
, mirror image
side to side and
, mirror image
end to end. The symbols will be
displayed.
When sewing embroideries only
mirror image side to side can be
used.
Stitch width
When you select a stitch, the
machine automatically sets
the best stitch width which is
displayed with numbers on the
Infodisplay. You can change the stitch
width by pressing the (+) or (-) button.
The width can be adjusted between
0 and 6 mm. Not active in REP
position.
When sewing embroideries the
width can be set between 2 and 6,
to change size of embroidery.
MENU - Selected group of stitches
Your machine has three menus
- one for stitches, two for letters.
Your choice is displayed when you
have pressed the MENU button to
select stitches
, outline block letters
or script letters . The stitch
number or the selected letter will also
be displayed.
When sewing embroideries the
menu number will be displayed to
the upper right.
FUNC - Selected function
When you turn on the machine,
the selected function displays
NORM. Touch the FUNC button to
PROG for programming. If you touch
the button again, REP = repeat will
be displayed to sew your programmed
stitches. After a third touch, NORM is
displayed again.
Not used when sewing
embroideries.
17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Husqvarna SCANDINAVIA 400 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info