518170
23
Zoom out
Zoom in
Vorherige Seite
1/64
Nächste Seite
23
Functions and InfoDisplay
Mirror images
Mirror image side to side .
In NORM and PROG only the stitch selected is mirrored.
The entire program is mirrored in REP. You can also
mirror the width when you wish to change the straight
stitch needle position, e.g. from left to right.
When mirror image side to side is selected the symbol
will be shown on the Infodisplay.
Mirror image end to end .
In NORM and PROG only the stitch selected is mirrored.
The entire program is mirrored in REP.
When mirror image end to end is selected the symbol
will be shown on the Infodisplay.
Programming STOP
The STOP button is used to conclude a stitch program, i.e. the machine fastens
the thread and stops automatically when the sewing of your stitch or letter
combination is completed. The symbol
is displayed to the very right.
You can continue your programming even after having pressed STOP. In
REP position the
is displayed. Then, when sewing, the machine stops
automatically and fastens the thread in every position where you have
programmed STOP and at the end of the stitch combination. Just press
the foot control again and the machine will sew the rest of what you have
programmed.
If you wish to repeat your stitch combination without having the machine stop,
press the STOP button to cancel the STOP in REP position.
The symbol
will disappear from the Infodisplay.
(If you should forget to enter STOP while in PROG it is also possible to use
the STOP button in REP position. The STOP will remain until you select
another function or stitch.)
If you have programmed STOP at the end of your program and then mirror
the entire program in length, the STOP will be placed at the beginning. Use the
button
and advance to the next stitch to avoid STOP.
If you cancel the STOP button when sewing embroideries, the machine will
sew the entire embroidery without stopping to change thread color.
23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Husqvarna SCANDINAVIA 400 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info