Bedienungsanleitung Husqvarna T535i XP (Seite 7 von 32) (Englisch)

733805

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

• Do not try to catch falling sections or make cuts if the

operator is only attached with one rope. Always use

two safety ropes.

• During felling operations, lift your hearing protection

immediately when the sawing is complete. It is

important that you hear sounds and warning signals.

• You must understand the effects of kickback and

how to prevent them before you use this product.

See

Kickback information on page 14

and

Common

questions about kickback on page 14

for

instructions.

• Do not use a product, battery or battery charger that

is defective.

• Do not use the product if you are tired or while under

the influence of alcohol, drugs or medicine. Do not

use the product if you are in a condition that can

have a negative effect on your vision, alertness,

coordination or judgment. The risk of being tired

increases before the end of a work period.

• Do not start a product unless the guide bar, saw

chain and all covers are assembled correctly. If not,

the drive sprocket can come loose and cause

serious injuries. See

Assembly on page 12

for

instructions.

• Make sure that there is no risk that persons or

animals touch or influence on your control of the

product.

• If you are not careful, the risk of kickback increases.

A kickback can occur if the kickback zone of the

guide bar accidentally touches a branch, tree or

other objects.

• Do not hold the product with one hand. This product

is not safely controlled with one hand.

• Hold the product tightly with your right hand on the

top handle and your left hand on the front handle.

Put your fingers and thumbs around the handles.

This decreases the effect of kickback and lets you

keep control of the product. Do not let go of the

handles!

• Make sure that you have stable feet and that the saw

chain does not touch an object.

• Do not use the product above shoulder height and

try not to cut with the guide bar tip.

• Do not try pruning or limbing operations if you do not

have special training.

• The vibration level increases if you cut with cutting

equipment that is incorrect or not correctly

sharpened. Cutting hardwoods, such as broadleaf

trees, causes more vibration than cutting softwoods,

such as conifers.

• Overexposure to vibration can lead to circulatory

damage or nerve damage in persons who have

decreased circulation. Speak to your physician if you

experience symptoms of overexposure to vibration.

Such symptoms include numbness, loss of feeling,

tingling, pricking, pain, loss of strength, changes in

skin colour or condition. These symptoms usually

occur in the fingers, hands or wrists increases in cold

temperatures.

• Prevent situations which you think is beyond your

capability.

959 - 006 - 15.05.2019

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Husqvarna T535i XP Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Husqvarna T535i XP

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info