Bedienungsanleitung Husqvarna T540i XP (Seite 6 von 32) (Englisch)

733997

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

• Use power tools only with specifically designated

battery packs. Use of any other battery packs may

create a risk of injury and fire.

• When battery pack is not in use, keep it away from

other metal objects, like paper clips, coins, keys,

nails, screws or other small metal objects, that can

make a connection from one terminal to another.

Shorting the battery terminals together may cause

burns or a fire.

• Under abusive conditions, liquid may be ejected

from the battery; avoid contact. If contact

accidentally occurs, flush with water. If liquid

contacts eyes, additionally seek medical help.

Liquid ejected from the battery may cause

irritations or burns.

• Do not use a battery pack or tool that is damaged

or modified. Damaged or modified batteries may

exhibit unpredictable behaviour resulting in fire,

explosion or risk of injury.

• Do not expose a battery pack or tool to fire or

excessive temperature. Exposure to fire or

temperature above 130 °C may cause explosion.

• Follow all charging instructions and do not charge

the battery pack or tool outside the temperature

range specified in the instructions. Charging

improperly or at temperatures outside the specified

range may damage the battery and increase the

risk of fire.

Service

• Have your power tool serviced by a qualified repair

person using only identical replacement parts. This

will ensure that the safety of the power tool is

maintained.

• Never service damaged battery packs. Service of

battery packs should only be performed by the

manufacturer or authorized service providers.

General chain saw safety warnings

• Keep all parts of the body away from the saw chain

when the chain saw is operating. Before you start

the chain saw, make sure the saw chain is not

contacting anything. A moment of inattention while

operating chain saws may cause entanglement of

your clothing or body with the saw chain.

• Always hold the chain saw with your right hand on

the top handle and your left hand on the front

handle. Holding the chain saw with a reversed

hand configuration increases the risk of personal

injury and should never be done.

• Hold the chain saw by insulated gripping surfaces

only, because the saw chain may contact hidden

wiring. Saw chains contacting a ”live” wire may

make exposed metal parts of the chain saw ”live”

and could give the operator an electric shock.

• Wear eye protection. Further protective equipment

for hearing, head, hands, legs and feet is

recommended. Adequate protective equipment will

reduce personal injury from flying debris or

accidental contact with the saw chain.

• Do not operate a chain saw on a ladder, from a

rooftop, or any unstable support. Operation of a

chain saw in this manner could result in serious

personal injury.

• Always keep proper footing and operate the chain

saw only when standing on fixed, secure and level

surface. Slippery or unstable surfaces may cause a

loss of balance or control of the chain saw.

• When cutting a limb that is under tension, be alert

for spring back. When the tension in the wood

fibres is released, the spring loaded limb may strike

the operator and/or throw the chain saw out of

control.

• Carry the chain saw by the front handle with the

chain saw switched off and away from your body.

When transporting or storing the chain saw, always

fit the guide bar cover. Proper handling of the chain

saw will reduce the likelihood of accidental contact

with the moving saw chain.

• Follow instructions for lubricating, chain tensioning

and changing the bar and chain. Improperly

tensioned or lubricated chain may either brake or

increase the chance for kickback.

• Cut wood only. Do not use chain saw for purposes

not intended. For example: do not use chain saw

for cutting metal, plastic, masonry or non-wood

building materials. Use of the chain saw for

operations different than intended could result in a

hazardous situation.

• This chain saw is not intended for tree felling. Use

of the chain saw for operations different than

intended could result in serious injury to the

operator or bystanders.

• Follow all instructions when clearing jammed

material, storing or servicing the chain saw. Make

sure the switch is off and the battery pack is

removed. Unexpected actuation of the chain saw

while clearing jammed material or servicing may

result in serious personal injury.

Causes and operator prevention of kickback

Kickback may occur when the nose or tip of the guide

bar touches an object, or when the wood closes in and

pinches the saw chain in the cut. Tip contact in some

cases may cause a sudden reverse reaction, kicking

the guide bar up and back towards the operator.

Pinching the saw chain along the top of the guide bar

may push the guide bar rapidly back towards the

operator. Either of these reactions may cause you to

lose control of the saw which could result in serious

personal injury. Do not rely exclusively upon the safety

devices built into your saw. As a chain saw user, you

should take several steps to keep your cutting jobs free

from accident or injury. Kickback is the result of chain

saw misuse and/or incorrect operating procedures or

conditions and can be avoided by taking proper

precautions as given below:

1036 - 005 - 29.06.2020

Husqvarna T540i XP Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Husqvarna T540i XP

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info