Bedienungsanleitung Husqvarna TRIBUTE 140C (Seite 36 von 48) (Englisch)

518172

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

36 – Basic Sewing Te nique

SEWING BUTTONHOLES

The buttonholes in your sewing machine are specially

adjusted for different kinds of fabric and garments. Look

at the stitch table on the last pages in this book to À nd

descriptions of each buttonhole.

The Exclusive SEWING ADVISOR™ feature will select

the best buttonhole and stitch settings for your fabric.

Fabric should be interfaced and/or stabilized where

buttonholes are to be sewn.

Automatic One-Step Sensor Buttonholes

When you select a buttonhole stitch with the Sensor One-

Step Buttonhole Foot connected, you will be able to set

the size of the button on the GraphicDisplay using the

up and down arrow buttons. When sewing, your sewing

machine automatically sews the buttonhole long enough to

À t the selected button size. Because the Sensor One-Step

Buttonhole Foot measures as it sews, every buttonhole will

be the same size.

Note: The buttonhole size will vary with the thickness and style of

your button. Always stitch a sample buttonhole on scrap fabric À rst.

1. Attach the Sensor One-Step Buttonhole Foot.

2. Plug the cord into the socket above the needle area,

behind the light bulb.

3. Measure the button diameter using the button

measuring chart on the front of the machine.

4. Use the up and down arrow buttons to set the button

size on the GraphicDisplay. The size can be set between

0-50 mm.

5. Place the fabric and stabilizer under the Sensor One-

Step Buttonhole Foot. The measurement wheel can

be raised by lifting it, which makes it easier to place

the fabric under the presser foot. Use the markings on

the left toe of the Sensor One-Step Buttonhole Foot

to position the garment edge. Place the edge of the

garment at the middle mark to have 5/8’’ (15 mm) from

the edge to the buttonhole.

6. Before sewing, line up white area on the side of the red

wheel with the white marking line on the foot.

7. Step on the foot control. The Sensor One-Step

Buttonhole Foot lowers automatically. A straight stitch

is sewn away from you stabilizing the left buttonhole

column, then the satin column is sewn toward you. This

is repeated for the right column. The bartacks are also

sewn automatically. The arrows on the GraphicDisplay

will show when each part of the buttonhole is sewn

and in what direction. Keep the foot control depressed

until the buttonhole is À nished. The machine will stop

automatically when the buttonhole is complete.

1:0, 1:23, 1:25, 1:26, 1:27 Buttonhole Stitches

Fabric: All types of fabric.

Select: The fabric you are using and the

Buttonhole technique (The Exclusive

SEWING ADVISOR™ feature selects a

buttonhole suitable for your fabric).

Use: The Sensor One-Step Buttonhole Foot

and the needle recommended for your fabric.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Husqvarna TRIBUTE 140C Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Husqvarna TRIBUTE 140C

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info