627051
14
Zoom out
Zoom in
Vorherige Seite
1/28
Nächste Seite
14
CHANGES AND TYPING ERRORS RESERVED CHANGES AND TYPING ERRORS RESERVED
5.2. foundaTion and insTallaTion
Figure B – Foundation dimensions
Take the work table as radius, go 360° around the column to determine the max. area of the foundation. The
diameter of the foundation is 1800 mm (see figure B). Customers can decide the foundation area according
to their own needs.
The depth of the foundation is chosen so that it rests on a dense soil. The depth shown in figure D is just for
reference.
Pour concrete around the foundation bolts after setting these in the accurate positions. After solidification of
the concrete, place the machine on the foundation and tighten the foundation bolts. Check adjustment with
a spirit level in longitudinal and transversal direction.
Picture C – Machine transportation
Picture D – Foundation and installation
6. Transmission
Figure E – Transmission
6.1. lisT of gears, worm wheels, worm and rack
Number in drawing 1 2 3 4 5 6 7 8 9
Part drawing no. 10-201 10-203 10-212 10-211 30-251 30-206 30-204 30-202 30-229
Number of teeth and starts 77 1 14 48 1 38 34 31 14
Module 2.5 1.5 2.5 1.5 2 1 1 2.5 2.5
Direction of helical angle 3“ 3’
59“ 3“ 3’
59“ 4“ 23’
55“ left
Class of accuracy 9 9 9 9 9 9 9 9 9
Material 45 45 45 45 45 QT400 45 45 45
Heat treatment and hardness T235 T235
H35 T235 T235 T235 T235 T235 HV500 T235
Number in drawing 10 11 12 13 14 15 16 17 18
Part drawing no. 30-110 30-248 30-247 30-244 30-246 30-245 30-243 30-240 30-239
Number of teeth and starts 60 59 52 42 21 28 38 53 27
Module 2 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5
Direction of helical angle left
Class of accuracy 9 9 9 9 9 9 9 9 9
Material QT400 45 45 45 45 45 45 45 45
Heat treatment and hardness G48 G48 G48 G48 G48 G48 G48 G48
Number in drawing 19 20 21 22 23 24 25 26 27
Part drawing no. 30-237 30-255 30-212 30-211 30-224 30-213 30-214 30-222 30-218
Number of teeth and starts 58 15 45 57/60 20 60 20 32 57
Module 1.5 1.5 2 2/1 2 1 2 2 2
Direction of helical angle
Class of accuracy 9 9 8-7-7 8-7-7/9 8-7-7 9 7-6-6 8-7-7 7-6-6
Material 45 45 45 45 45 45 45 45 45
Heat treatment and hardness G48 G48 G52 G52/42 G52 G52 G52 G52 G52
Number in drawing 28 29 30 31 32 33 34
Part drawing no. 30-223 30-217 30-216 30-220 30-220 30-502 30-207
Number of teeth and starts 32 62 22 20 45 68 20
Module 2 2 2 2 2 2 2
Direction of helical angle
Class of accuracy 8-7-7 8-7-7 8-7-7 8-7-7 8-7-7 9 9
Material 40Cr 45 45 45 45 Fiber 45
Heat treatment and hardness G52 G52 G52 G52 G52 T235
14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Huvema HU 40 TI wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Huvema HU 40 TI

Huvema HU 40 TI Bedienungsanleitung - Deutsch - 28 seiten

Huvema HU 40 TI Bedienungsanleitung - Holländisch - 28 seiten

Huvema HU 40 TI Bedienungsanleitung - Französisch - 28 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info