50
CHANGES AND CHANGES AND
si di r ea
1. si di r f TU
2. in
This manual starts with a par
instructions and symbols. After that, the manual deals with all functions and operating instructions for the Sino
digital readout when used on a lathe
3. Specications
Maximum power consumption
V........................................................................................................... 80V~260V
Supply voltage uctuation not to exceed +/- 15% of the oper
Supply frequency ..........................................................................................
Operating temper ......................................................................................... 0~45°C
Storage temper .......................................................................................
Relativ < 90% (20 +/- 5° C)
Display resolution ............................................. 5 µm, 1 µm, 10 µm, 0.1 µm, 0.2 µm, 0.5 µm
W 3.2 kg
Subject to change.
4. Safety
Before using the machine, it is your responsibilit
instructions in this manual. A safety
your machine. Accidents can be a
4.1 Safety instructions - Digital readout
W
Only use the digital readout for what it was designed for-
The digital readout must be grounded.-
Never open the house of the digital readout. This will lead to electric shock. -
Never try to repair the digital readout y-
Never use the digital readout in a moist en-
with liquid, this will lead to electric shocks or re.
Never use the digital readout around (ammable) gasses.-
Rechargable lithium -
period of time, the batteries will become damaged.
Switch the digital readout and/ or machine immediately off when there is smok-
wrong. Continue operating will lead to electric shocks an / or re.
Make sure that the connections between encoder and digital readout are not brok-
broken connections lead to wrong data displa
Defective parts may only be -
Never leav-
disconnect it from the power source before you lea
correct usaGe of the DiGit reaDout
Correct usage of the equipment means that:
the working capacity is not exceeded.-
qualied and capable people work with the digital readout.-
the safety instructions as described in this manual and as v-
always.
4.2 Symbols
This manual uses a series of symbols and signal words which are intended to con
importance of the safety messages:
Attention!
Command in regard to a certain action.
Disconnect from the mains!
Instruction to disconnect the machine from the main power source to create a safe
situation.
Read the manual!
Command: read and understand the manual.
5
3. Specications
Maximum power consumption
V........................................................................................................... 80V~260V
Supply voltage uctuation not to exceed +/- 15% of the oper
Supply frequency ..........................................................................................
Operating temper......................................................................................... 0~45°C
Storage temper .......................................................................................
Relativ < 90% (20 +/- 5° C)
Display resolution ............................................. 5 µm, 1 µm, 10 µm, 0.1 µm, 0.2 µm, 0.5 µm
W 3.2 kg
Subject to change.
4. Safety
Before using the machine, it is your responsibility
instructions in this manual. A safety
your machine. Accidents can be a
4.1 Safety instructions - Digital readout
W
Only use the digital readout for what it was designed for-
The digital readout must be grounded.-
Never open the house of the digital readout. This will lead to electric shock. -
Never try to repair the digital readout y-
Never use the digital readout in a moist en-
with liquid, this will lead to electric shocks or re.
Never use the digital readout around (ammable) gasses.-
Rechargable lithium batteries -
period of time, the batteries will become damaged.
Switch the digital readout and/ or machine immediately off when there is smok-
wrong. Continue operating will lead to electric shocks an / or re.
Make sure that the connections between encoder and digital readout are not brok-
broken connections lead to wrong data displa
Defective parts may only be replaced by original Sino spare parts.
Never leav-
disconnect it from the power source before you lea
correct usaGe of the DiGit reaDout
Correct usage of the equipment means that:
the working capacity is not exceeded.-
qualied and capable people work with the digital readout.-
the safety instructions as described in this manual and as v-
always.
4.2 Symbols
This manual uses a series of symbols and signal words which are intended to con
importance of the safety messages:
Attention!
Command in regard to a certain action.
Disconnect from the mains!
Instruction to disconnect the machine from the main power source to create a safe
situation.
Read the manual!
Command: read and understand the manual.
