Bedienungsanleitung Hwam 60 (Seite 54 von 60) (Englisch, Dänisch, Schwedisch, Norwegisch)

571953

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

combustion will be consumed by the ﬁre. Otherwise they build up soot in the chimney (constituting

a chimney ﬁre risk) or will be released in a non-combusted state into the environment. The wrong

amount of air supply creates inefﬁcient combustion and a modest effect.

•Don’tsavourthereduringnighttime

We advise against adding ﬁre wood to your stove and reducing the air supply at night in an attempt

to still have some embers left in the morning. If you do so, large amounts of hazardous smoke will be

emitted, and your chimney will be exposed to unnecessarily large amounts of soot with the risk of a

chimney ﬁre.

Cleaning the glass

We recommend wiping the glass after a ﬁre. This is best done using a paper towel.

Types of fuel

The stove may be damaged by very high temperatures and the glass may turn white, for example. This can

be avoided by never allowing the stove to burn with the ashpan open and taking great care with types of

fuel that develop excessive heat, such as briquettes.

We recommend using birch or beechwood, which has been split and stored for at least one year outdoors

under cover. Wood stored indoors tends to become too dry and burn too quickly.

Briquettes give off a lot of heat. Certain types expand considerably, thus causing an uncontrollable com-

bustion.

Coal burns at a high temperature and makes a lot of soot.

Coal must be burned using the coal insert.

Not suitable for fuel in these models.

Coke burns at a high temperature and makes a lot of soot. Coke must be burned using the coal insert.

Coke causes severe wear and tear to stove and combustion chamber and, consequently, this considerably

reduces the life expectancy of the stove and chimney.

Not suitable for fuel in these models.

The stove is EN 13240 approved for ﬁring wood only. No particle board, lacquered, painted or

treated wood, plastics, or rubber may be burned.

maIntenance

Cleaning

Any maintenance of the stove should only be carried out when it is cold. Daily maintenance is limited to

vacuum cleaning the stove externally, using the soft brush attachment. You can also dust the stove using a

dry, soft cloth or brush. But remember, only when the stove is cold. Do not use water, spirit or any other

kind of cleaner, as this will damage the lacquer. Once a year, the stove should be thoroughly serviced. The

combustion chamber should be cleared of ashes and soot. Door and ﬁttings should be lubricated

using a copper-based grease.

Service inspection

Your stove should be given a thorough, preventive inspection once every two years. This includes:

• Thorough cleaning of the stove.

• Lubricating the hinges with copper grease.

• Checking gaskets. Replace gaskets if they are not intact or are no longer soft.

• Checking the construction (only some countries).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hwam 60 Seite 54

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Hwam 60

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info