Bedienungsanleitung Hwam ABC 7H (Seite 18 von 60) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Schwedisch, Norwegisch)

571942

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

Installation

Legislation

Installation of your woodburning stove must always comply with local building regulations.

It is a good idea to consult with your local chimney sweep before installing, since he will

be the one to sweep the chimney and stove.

Room requirements

There must be a constant supply of fresh air to the room in which the stove is to be

installed. A window that opens or an adjustable air vent should sufﬁce, but it is also

possible to connect the stove to an ABC fresh air system.

Load-bearing capacity of ﬂoor

Before installing the stove, you must ensure that the load-bearing capacityof the ﬂoor

can withstand the weight of the stove and the chimney. The weight of the stove is

indicated in the brochure, and that of the chimney should be calculated according to

its dimensions and height.

Distance to inﬂammable materials

Your ABC woodburning stove should always be installed on a non-combustible hearth. If it

is installed on a wooden ﬂoor or similar, the ﬂoor must be covered with a non-combustible

material to a distance of 30 cm in front of the stove and 15 cm to each side measuring

from the door of the combustion chamber. A 2 mm thick ABC stove hearth will, in addition,

cover the area underneath the stove.

Chimney requirements

The chimney must be of a sufﬁcient height to enable an adequate draft and to prevent

smoke problems.

The chimney must have a minimum opening equivalent to Ø 15 cm. The chimney opening

should always be at least the size of the outlet socket of the stove. The chimney must

have an easily accessible soot door.

Air damper

We recommend that the chimney or the pipe is equipped with a damper so that the

chimney draught can be regulated on days with strong winds. It is not allowed that the

damper close the pipe totally. There must always be a free area of min. 20% of the total

opening of the chimney or the pipe.

Requirements to smoke gas damper

If a smoke gas damper is mounted, it must be manually operated as well as easy to

operate. Its position must be visible and stable. The damper must not be capable of

closing completely tight. This is ensured by a cutting out in the damper of at least 20% of

the damper’s the area, however at least 20 cm

English

ABC model no. 1 7H 14 17

Chimney draft nominal Pa. 11 15 13 15

ABC model no. (Sectional view A on page 3) 1 7H 14 17

1. Recommended for brick wall, cm 10 10 10 10

1. For inﬂammable back wall, cm 20 20 20 20

2. For inﬂammable side wall, cm 25 25 25 25

3. Fireproof area in front, cm 30 30 30 30

4. Fireproof area in front, cm 73 77 77 77

5. From opening to edge of plate, cm 15 15 15 15

6. Distance to furnishings in front, cm 80 80 80 80

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hwam ABC 7H Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info