Bedienungsanleitung Hwam Classic 10-50 (Seite 25 von 40) (Deutsch, Englisch, Dänisch, Schwedisch)

744553

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Mounting the blowers (Drawing F)

Connection of the blowers must be done now, and the blowers must be test run before the

stove insert (9) is pushed into place. The blowers are delivered loose, and they are connected

with wires. Place the wire (6) between the blowers into the rear of the outer casing. Let the

blowers (8) hang down outside the casing. The connection with the white wire (4) can be

done from both sides or directly in through the front to the connecting terminal (5). Please

note that the white wire is not heatproof. For this reason, it must not be positioned in the

outer casing. First, connect the wires making sure the colours match. If you want the wires

to be prolonged, the poles must match so the blowers can function.

Remove smoke shelf (7) and bafﬂe plate (8) from the stove insert. Place a Ø 5 mm seal into

the bottom of the outlet bushing. Then push the stove insert (9) into place in the outer casing.

HWAM Classic 10/50 has two dowels in the bottom of the outer casing ﬁtting the holes in the

bottom of the insert. Be careful that the wire between the blowers doesn’t get jammed under

the insert.

When HWAM Classic 10/50 is put into place, the blowers must be pushed into the holes

between the stove and the outer casing. Push the blowers into the holes between the stove

and the outer casing. The blower can be eased in on the hinged side of the door provided

that it is not opened more than 45°. The blower should be positioned with the stickers facing

the rear. The seal (7) around the blowers prevents them from direct contact with the metal

and at the same time they ﬁx the blowers to the holes.

A3.Then pull the tube (2) down into the smoke outlet bushing of the stove insert and lock it by

bending the four locking ﬂaps out in the sides of the inner side of the insert. Remount bafﬂe

plate (8) and smoke shelf (7).

The insert is put into place when the 4 long screws (1) just behind the door ﬁt under the

corresponding 4 threaded holes in the upper edge of the outer casing. Fix the upper edge of

the outer casing by screwing the 4 screws into the threaded holes. In HWAM Classic 10/60

the screws are at the same time ﬁxing an exhaust rib (2) over the door. The exhaust rib is

ﬁxed to its place between two bushings (3).

(Drawing B) Connection with front frame, vertical view of the upper edge of the front

B1 Vertical view of the front of HWAM Classic 10/60 with standard front frame (4) outside the

brickwork

B2 Vertical view of the front of HWAM Classic 10/50 with adjusted front frame (5) being ﬂush

with the brickwork

B3 Sectional view of the front with narrow angle iron frame, (6) which seals the joint between

the liner and the brickwork.

B3. If the space between the outer casing and the brickwork is less than 10 mm it can be covered

with a narrow angle frame. If the space is less than 70 mm it can be covered with a wide front

panel lying outside the brickwork.

Seal between ﬁre tube and chimney on top of the batts using heatproof mortar (5). This can

be done through the soot door (1) of the chimney, and should only be done when the stove

insert is assembled.between ﬁre tube and chimney on top of the batts using heatproof mortar

(5). This can be done through the soot door (1) of the chimney, and should only be done

when the stove insert is assembled.

Front panels are to be clipped on when the stove insert is on its place. The stove insert is

now ready for use.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hwam Classic 10-50 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Hwam Classic 10-50

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info