Bedienungsanleitung Hyundai 56400 (Seite 5 von 11) (Deutsch, Englisch, Holländisch, Französisch, Polnisch)

675858

Zoom out

Zoom in

Vorherige Seite

1/11

Nächste Seite

HYUNDAI

8 9

ENGLISH

Switching on and off

• To run the machine, slide the on/off-switch (1)

in the direction of the grinding wheel.

• To switch off the machine, you slide the on/

off-switch (1) back.

CLEANING AND MAINTENANCE

The machine does not require any special main-

tenance.

• Make sure that the ventilation openings are

kept clean. Especially when working in a dusty

environment.

- Before removing dust always unplug the tool.

- Do not use brushes of metal or the like to

remove dust and avoid damaging the internal

parts.

TECHNICAL DATA 56400

Mains voltage V 230-240

Mains frequency Hz 50

Power input W 750

No load speed min

-1

12,000

Wheel diameter mm 125

Spindle thread M14

Weight kg 1.89

NOISE AND VIBRATION

Typically the A-weighted sound pressure level of

the machine is 90.2 dB(A).

Uncertainty K = 3.0 dB(A).

The noise level when working can exceed

101.2 dB(A).

Wear hearing protection!

Vibration emission value a

h,AG

= 9.931 m/s

Uncertainty K = 1.5 m/s

GUARANTEE

Refer to the enclosed guarantee conditions for the

terms and conditions of guarantee.

• Make sure that the grinding wheel has the

correct dimensions and fits properly on the

spindle.

• Treat grinding wheels with great care in

accordance with the instructions supplied with

the grinding wheel.

• Inspect the grinding wheel before every use.

Do not use cracked or otherwise damaged

grinding discs.

• Make sure that the grinding wheel is mounted

in accordance with the instructions.

• After mounting the grinding wheel let the

machine run at no load speed in a safe area. If

the machine vibrates strongly or if you see

damages in the grinding wheel, switch off the

machine immediately and try to establish the

cause.

• Do not use adapters or other aids to mount

grinding wheels with a different spindle

diameter.

• Make sure that the workpiece is properly

supported or fixed.

• Never use a cut-off wheel for deburring.

• Make sure that sparks cannot hit any persons

or set flammable materials alight.

• Always wear safety goggles, hearing

protection and if necessary other protective

means, such as working gloves, coat, hard

hat, etc.

• Mount the screening guard. Never use the

machine without screening guard fitted.

• Make sure that the ventilation openings are

kept clean. Especially when working in a dusty

environment.

- Before removing dust always unplug the tool.

- Do not use brushes of metal or the like to

remove dust and avoid damaging the internal

parts.

• Beware that after switching off the tool the

wheel continues to rotate for a short period.

ELECTRICAL SAFETY

Always check that the power supply

corresponds to the voltage on the

rating plate.

ANGLE GRINDER

56400

WARNING

Read all safety warnings and all

instructions. Failure to follow the

warnings and instructions may result in

electric shock, re and/or serious

injury. Save all warnings and

instructions for future reference.

SAFETY WARNINGS

When using the machine, always observe the

enclosed safety warnings as well as the additional

safety warnings.

The following symbols are used throughout this

manual:

Denotes risk of personal injury or

damage to the machine.

Fire hazard..

You will nd the following symbols on the

machine:

Take measures to protect your eyes.

Consult the manual.

ADDITIONAL SAFETY INSTRUCTIONS FOR

ANGLE GRINDERS

Do not cut or grind light metal with a

magnesium content exceeding 80%;

since this type of metal is ammable.

• Do not use any other accessories than

grinding wheels.

• Make sure that the speed stated on the

grinding wheel is larger or the same as the

speed of the angle grinder given on the rating

plate.

• Do not cut workpieces requiring a maximum

depth of cut exceeding that of the grinding

wheel.

DESCRIPTION (g. A)

Your angle grinder has been designed for grinding

and cutting masonry and steel. Equipped with an

auto-stop function for maximum safety.

1. On/off switch

2. Side handle

3. Lock knob

4. Spindle

5. Guard

6. Nut

The package contains the following parts:

Angle grinder

Side handle

Guard

Spanner

Nut M14

Set of carbon brushes

Instruction manual

Safety warnings

Guarantee and service

Mounting and removing the guard

• Place the machine with the spindle upwards on

a table

• Place the guard (5) over the spindle (4).

• Tighten the nut (6) firmly.

To remove the guard, proceed in reverse order.

Never use the machine without guard.

Mounting and removing a grinding wheel

• Place the machine on a table, guard up.

• Fit the spacer onto the spindle.

• Place the grinding wheel on the spacer.

• Screw the tension nut onto the spindle.

• Press the lock knob and firmly tighten the

tension nut using the spanner supplied.

• Release the lock knob.

To remove the grinding wheel, proceed in reverse

order.

Prior to mounting or removing a

grinding wheel always unplug the tool.

Mounting and removing the side handle

• Tighten the side handle in one of the mounting

holes.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hyundai 56400 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info