Bedienungsanleitung Hyundai 57183 - HYMT5200 Multi-tool (Seite 7 von 44) (Englisch)

675908

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

Page 7

1.9. Additional safety labels.

Keep all children, bystanders and helpers 15

meters from the machine.

Warning against flying objects wear helmet,

goggles and ear protection.

Warning: Danger from hot components,

especially exhaust - Keep clear of combustible

materials.

Warning: Danger from thrown objects.

1.10. Additional safety instructions.

1.10.1. Spectators should be told how to

correctly attract the operator’s attention,

otherwise it could create an unsafe situation.

1.10.2. Never touch either the nylon cutting

head or the metal cutting blades whilst the

machine is in use – You MUST allow the

machine to come to a stop and to remove the

HT lead before carrying out any maintenance.

1.10.3. During and after use the engine and

exhaust will be very HOT you must keep all

your all parts of your body and clothing

including all combustible materials clear of the

engine and exhaust.

1.10.4. DO NOT use the machine during or

after rain, snow or sleet. The floor will become

slippery. DO NOT use the machine on a slope

or uneven ground or if there is the chance of

slipping or losing the stability.

1.10.5. If you trip or fall whilst machine is in

use you MUST immediately release the

throttle, and turn off the ignition switch.

1.10.6. If you hit any obstacles you must stop

the machine and remove the HT lead so that

you can inspect the machine. IF the machine is

damaged in any way you MUST get it repaired

before restarting work.

1.10.7. DO NOT use the machine with a blunt,

cracked or damaged cutting blades.

1.10.8. When using the blade cutter there is a

danger of kickback. Kickback is a reaction that

can occur when the rotating cutting blade

strikes an object which cannot be cut. This

contact causes the cutting blade to stop for an

instant and then suddenly repel from the

object taken with accelerated force. This

reaction can be violent enough that the

operator momentary loses control of the

machine. A kickback can occur without

warning when the cutter encounters an

unseen obstacle when the blade is running.

This is more likely in areas where it is difficult

to properly check the material/area to be cut.

For easy and safe cutting, cut the weeds/brush

from right to your left.

1.10.9. If any trimmed materials get tangled in

the nylon cord or cutting blade you MUST stop

the machine and remove the HT lead. Onley

then can you clear any blockages.

1.10.10.

NEVER use the machine with a saw blade

attachment other than as specified in this

manual it is STRICTLY FORBIDDEN.

1.10.11. DO not use the brush cutter

for trimming trees.

1.10.12. DO NOT wear rings and

jewelry or loose, dangling clothing that could

get caught in the machine. DO NOT wear

footwear with unprotected toes and DO NOT

work barefoot or without leg protection. In

certain situations, you have to wear head

protection.

1.10.13. DO NOT use the machine if

you are tired, ill or under the influence of

medication, drugs or alcohol.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hyundai 57183 - HYMT5200 Multi-tool Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info