Bedienungsanleitung Hyundai 57301 (Seite 12 von 32) (Deutsch, Englisch, Holländisch, Französisch, Polnisch)

675866

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

HYUNDAI

Connecting to power supply

This product is designed with a cord retainer (8)

that prevents the extension cord from being pulled

loose while using.

Always use cord retainer to properly

attach extension cord to the machine.

Failure to use cord retainer may result

in damage to the machine and/or

extension cord.

• Form a loop with the end of the extension cord.

• Insert loop portion of extension cord through

opening and place over cord retainer.

• Slowly pull loop against cord retainer until the

slack is removed.

• Plug product into extension cord.

Failure to remove all excess cord slack

from extension cord retainer could

result in plug loosening from

receptacle.

DESCRIPTION (fig. A)

This device can be used as a weed killer, paint

remover and lighter for barbecue and fireplace.

Use this appliance for the intended purposes only!

Other forms of use can lead to injuries or

accidents!

1. On/off switch

2. Hot air nozzle

3. Stand

4. Ventilation openings

5. Extension handle connection

6. Extension handle

7. Handle

8. Cord retainer

Nozzles (fig. B)

9. Nozzle for weed control

10. Nozzles for paint removel

11. Nozzle for barbecue/fireplace lighter

Packaging contents

The packaging contains the following

components:

• Weed burner

• Nozzle for weed control

• 2 nozzles for paint remover

• Nozzle for barbecue/fireplace lighter

• Extension bar

• Handle

OPERATION

Always use with caution! Do not cover

the ventilation openings during use as

it causes a risk of burns! Do not touch

the hot nozzle!

Temperature settings

With the temperature switch (6) you can select

from two temperature settings.

Setting I 50 °C (venting/ cooling)

Setting II 600 °C

The volume of air in each setting 500 l /min.

To turn on the power

• Push the switch (1) in position I or position II.

To turn off the appliance

• Push the switch on position 0.

To install the nozzle

The nozzles can easily be pushed over the hot air

nozzle. Never touch the nozzles during or

immediately after use of the device. The nozzles

are very hot.

INSTRUCTIONS FOR USE

Weed burner

Assemble the extension handle:

The extension handle consists of two parts.

Connect both parts and attach the extension

handle to the device. To attach the extension

handle, place the extension bar in the machine

and turn the extension handle a quarter turn to the

right. Make sure that the extension handle firmly

clicks into position.

If using the device as a weed killer you

must use the extension handle. Hold

the weed killer firmly by holding the

end of the extension handle.

Ensure the extension handle is firmly fixed onto

the device and that the device is turned off.

• Install the nozzle (9) to destroy weeds.

• Insert the plug into the socket.

• Check to ensure the nozzle is not blocked

before turning the device on.

• Set the temperature to setting II.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hyundai 57301 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info