Bedienungsanleitung I-onik BTH-033 (Seite 14 von 20) (Deutsch, Englisch)

521912

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

26 27

Note:

- If pairing fails, please turn off the headset rst and then

repair according to steps 1-6 above.

- Once pairing is successful, the headset and the mobile phone

will remember each other; there will be no need to repair

next time. The headset can remember 8 paired devices. When

the number of paired devices exceeds 8, the rst one will be

replaced.

- Every time the headset is turned on, it will connect to the

last connected device automatically. If you want to pair it

with other devices, turn off the Bluetooth function of the last

connected device then pair the headset with the new device,

following steps 1-6 above.

3) Pairing the Headset with a Bluetooth Transmitter

You can connect the headset to a Bluetooth transmitter, to

enjoy music wirelessly. Take a BTT010 (Bluetooth transmit-

ter for iPod and iPhone - not included), for example. The

pairing steps are as follows:

1) Keep your headset and phone within 1 metre when

pairing.

2) Set the headset to enter pairing mode (refer to “How to

enter pairing mode”).

3) Turn on the Bluetooth transmitter. It will search for Blue-

tooth devices automatically and send a pairing request.

4) When the headset requests you to enter a PIN number,

the transmitter will respond “0000” automatically.

5) After successful pairing and connecting, the blue LED

indicator on the headset ashes twice every 4 seconds.

Note:

- The pairing password of the headset is “0000”. The headset

can, therefore, only pair with a Bluetooth transmitter whose

pairing password is “0000”.

- If pairing still fails after several tries, refer to the Bluetooth

transmitter user’s manual for further information.

4) Multi-pairing

The headset can connect with two devices at most. One is a

Bluetooth mobile phone supporting a HFP prole; the other

one is a Bluetooth music device supporting an A2DP prole.

If you want to nish the multi-pairing, proceed as follows:

1) Firstly, pair the headset with a Bluetooth transmitter

(refer to “Pairing the headset with a Bluetooth trans-

mitter”).

2) Turn off the Bluetooth transmitter.

3) Pair and connect the headset with a Bluetooth mobile

phone (refer to “Pairing the headset with a Bluetooth

mobile phone”).

4) Turn on the Bluetooth transmitter; it will connect to the

headset automatically.

Note:

- After successful multi-pairing, the paired devices will remem-

ber each other. You will not need to pair next time. If the

pairing information is deleted, connect the mobile phone with

the headset and then turn on the Bluetooth transmitter. Multi-

connecting can be performed.

- For a mobile phone supporting the HSP and A2DP at the same

time, you may set up a HSP and A2DP connection with the

headset simultaneously. At this time, the Bluetooth transmit-

ter must not be connected to the headset.

3. Reconnecting with a Bluetooth Device

1) Automatic connecting

Every time the headset is turned on, it will connect to the

last connected device automatically.

BTT010

(Fig. similar.

Not included.)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

I-onik BTH-033 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info