Bedienungsanleitung i.safe Mobile IS740.2 (Seite 4 von 45) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

662878

Zoom out

Zoom in

Vorherige Seite

1/45

Nächste Seite

EN 76

BATTERY USE

In actual use the run time of the device varies with the network status, working

environment and usage.

If the power of the battery is lower than normal, the device will prompt you to charge

it. Please charge the battery, otherwise you may lose any les which are not saved.

If you do not charge for a long time, the device will be powered o automatically.

WARNING

The device may only be charged at ambient temperatures in a range from 5°C … 35°C.

Please do not use charging equipment if the temperature exceeds this range.

INSTALLATION OF THE SIM CARDS

The device features two micro SIM card slots. The slots are accessible by removing the

cover of the card compartment at the back of the device by removing the two screws

with the delivered screwdriver.

If you have installed two SIM cards, you can choose your primary card in:

<SIM cards>.

WARNING

Do only change the SIM card when the device is switched o.

Do not try to insert or remove the SIM cards when any external power supply

is connected, otherwise the SIM card may be damaged.

INSTALLATION OF THE MICRO SD CARD

The device features a micro SD card slot (up to 32 GB). The slot is accessible by

removing the cover of the card compartment at the back of the device by removing

the two screws with the delivered screwdriver.

If you want to remove the micro SD card, please make sure that the card is not in use

by the device by selecting: <Settings>

<Storage> <Unmount SD card> <OK>.

Also you can change the micro SD card when the device is switched o.

WARNING

Do not try to insert or remove the micro SD card when any external power supply

is connected, otherwise the micro SD card may be damaged.

POWERING ON YOUR DEVICE

Press the [Power key] (1) until the screen lights up.

Depending on the security settings of your SIM card, the device may ask you for your

personal identication number (PIN) before starting up.

The rst time you power on your device, you will be prompted to assign a language,

date and time zone and enter your personal information.

You will also be asked to sign in or set up your Google™ account. You can do this later

but please note that some of the functions of the device like the Google Play™ Store

depend on a Google account.

Only use accessories approved by i.safe MOBILE GmbH.

Power o the device in hospitals or other places where the use of mobile phones

is prohibited. This device may aect proper work of medical equipment, such

as pacemakers, so always keep a distance of at least 15 cm between the device

and these devices.

Observe all corresponding laws that are in force in the respective countries

regarding the use of devices while operating a vehicle.

Please power o the device and disconnect the charging cable before cleaning

the phone.

Do not use any chemical cleaning agents to clean the device or the charger.

Use a damp and anti-static soft cloth for cleaning.

Do not discard old and abandoned lithium batteries into the trash, send them

to designated waste disposal locations.

The user alone is responsible for any and all damages and liabilities caused by

malware downloaded when using the network or other data-exchange functions of

the device. i.safe MOBILE GmbH cannot be held responsible for any of those claims.

WARNING

i.safe MOBILE GmbH will not assume any liability for damages caused by disregar-

ding any of these advices or by any inappropriate use of the device.

MAINTENANCE / REPAIR

The device itself has no user-serviceable parts. It is recommended to perform

inspections according to the safety regulations and advises.

If there is a problem with the device, please contact your vendor or consult the service

center. If your device is in need of repair, you can either contact the service center or

your vendor.

BATTERY

The battery in this device is not removable by the user. The battery is not fully charged

when the device is purchased, but it contains enough energy to power on the device.

To obtain best battery performance and battery life, let the battery discharge comple-

tely before charging it completely for the rst three charging cycles.

CHARGING THE BATTERY

There are two possible ways to charge the IS740.2:

Connect the magnetic USB cable to the magnetic charger port (2) and connect

the other side of the USB cable with the socket of the power supply.

Connect the USB cable with the USB port (3) and connect the other side of the

USB cable with the socket of the power supply.

After charging, remove the USB cable from the charger.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

i.safe Mobile IS740.2 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info