Bedienungsanleitung Ibm ilv 300 (Seite 29 von 74) (Englisch)

214225

Zoom out

Zoom in

Vorherige Seite

1/74

Nächste Seite

Caution

To reduce the risk of injury to the eyes, do not look directly into the remote

control laser light and do not point the laser light into anyone’s eyes. The

remote control is equipped with a Class II laser that emits radiation.

To operate the remote control, point the remote at the projection screen or at the

projector (not at the computer). The range of optimum operation is about 15 feet

(4.5m).

To use the laser pointer, press and hold the Laser button. The laser turns off when

the button is released, or times out after two (2) minutes of continuous operation.

Pressing the remote’s power button when the projector’s power toggle switch is in

the Off position does not cause the projector to power up. You need to put the

projector’s power toggle switch in the On position to use the remote to power on

the projector.

When the projector is running, you can press the remote’s Power button to place

the projector in the Off state and power it off. For more information, see “Shutting

down the projector” on page 4-7.

Left and right remote mouse buttons are used to mimic the actions of the left and

right mouse buttons on your computer. Mouse cursor movement is managed via

the remote’s cursor control. Connect a USB cable to the USB connector on the

computer and to the projector to use these buttons and control your computer’s

mouse. When you do this for the first time, the Add New Hardware wizard may

appear. See “Using the projector with Windows 98” on page 2-4 for details on

loading the correct USB drivers.

Press the remote’s Menu button to open the projector’s menu system. Use the

arrow buttons to navigate, and the Select button to select features and adjust

values in the menus. See Chapter 5, “Using the menus”, on page 5-1 for more

information on the menus.

The remote also has Volume and Mute buttons to control the sound, a backlight

button to light the remote’s buttons in the dark, and Video and Computer buttons

to switch between sources.

Two presentation-specific features are also provided. Use the Blank button to

display a blank screen instead of the current slide (you can choose which color is

displayed, see “Settings menu” on page 5-5); use the Effect button to invoke a

user-definable action, such as freeze, zoom or change your aspect ratio for viewing

DVDs (see “Settings menu” on page 5-5) to learn to program this button).

If you are displaying presentations in Microsoft

PowerPoint, you can use the

remote’s mouse buttons to navigate through your presentation while in Slide Show

mode. To configure PowerPoint for this Choose Options from the PowerPoint

Tools menu, click the View tab, de-select the Popup Menu on Right Mouse Click

option in the Slide Show section, then click OK. After that, when you are in

Chapter 4. Using the projector features 4-3

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ibm ilv 300 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info