Bedienungsanleitung Ibm ilv 300 (Seite 32 von 74) (Englisch)

214225

Zoom out

Zoom in

Vorherige Seite

1/74

Nächste Seite

Presentation features

The following are presentation features provided. For more information, see

Chapter 5, “Using the menus”, on page 5-1.

v The Effect button on the remote allows you to assign various features to the

button. The default effect is About, which displays information about the

projector and current source. You can select among Blank, Mute, Aspect Ratio,

Source, Auto Image, Freeze, Zoom, and About. For more information, see

“Settings menu” on page 5-5. The freeze effect allows you to freeze the displayed

image. This is useful if you want to make changes on your computer without

your audience seeing them. The mask effect allows you to cover part of the

image with a black curtain.

v The Blank button on the remote allows you to display a blank screen instead of

the active source. For information on determining the color of this screen, see

“Settings menu” on page 5-5.

v The Startup Logo option lets you change the default start up screen to a blank

or default screen. For more information, see “Settings menu” on page 5-5.

v Two options, Power Save and Screen Save, are provided to automatically shut

down the projector after several minutes of inactivity or display a black screen.

This helps preserve lamp life. For more information, see “Settings menu” on

page 5-5.

Optimizing video images

After your video device is connected properly and the image is on the screen, you

can optimize the image using the onscreen menus. For general information on

using the menus, see Chapter 5, “Using the menus”, on page 5-1.

v Adjust the Keystone, Contrast, Brightness, Color, or Tint in the Picture menu.

v Change the Aspect Ratio. Choose the option that best fits your input source.

v The remote’s Effect button allows you to assign various features to the button.

The default effect is About, which displays information about the projector and

current source. You can select among Blank, Mute, Aspect Ratio, Source, Auto

Image, Freeze, Zoom, and About. See “Settings menu” on page 5-5 for details.

v Select a Sharpness setting. For more information, see “Advanced menu” on

page 5-3.

v Use the Color Control to adjust the color gain. For more information, see

“Advanced menu” on page 5-3.

v Adjust the Color Temperature. Select a listed warmth value. For more

information, see “Advanced menu” on page 5-3.

v Turn on Overscan to remove noise on the edges of the image.

Customizing the projector

You can customize the projector for your specific setup and needs. See “Settings

menu” on page 5-5 for details on these features.

v For rear projection, turn rear mode on in the Settings > System menu.

v For ceiling mounted projection, turn ceiling mode on in the Settings > System

menu.

v Specify which source the projector checks first for active video during power-up.

v Specify the function of the Effect button on the remote.

v Turn the projector’s display messages on and off.

4-6 IBM iLV300 Value Data/Video Projector: User’s Guide

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ibm ilv 300 Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info