q Push [PWR] to turn power ON.
w Set the audio and squelch levels.
➥ Push
[VOL/SQL•MONI ] for 1 sec. to activate the moni-
tor function.
➥ Rotate [SELECTOR
VOL
] to adjust the audio output level.
➥ Push
[VOL/SQL•MONI ]
to cancel the monitor function
.
➥ Push
[VOL/SQL•MONI ]
several times, then rotate [SE-
LECTOR
SQL
] to adjust the squelch level.
e While pushing [H/L], push [DIAL•DW ] to change the
channel group, if desired.
r Push [DIAL•DW ] once, then rotate [SELECTOR
DIAL
]
to select the desired channel.
• When receiving a signal, “
BBUUSSYY
” appears and audio is emit-
ted from the speaker.
• Further adjustment of the audio level may be necessary.
t Push [H/L] to select the output power, if necessary.
•“
11WW
” appears when low power is selected.
• Choose low power for short range communications, choose
high power for longer distance communications.
• Some channels are for low power only.
y Push and hold [PTT] to transmit, then speak into the micro-
phone.
•“
TTXX
” appears.
• Channel 70 cannot be used for transmission other than DSC.
u Release [PTT] to receive.
IMPORTANT: To maximize the readability of your transmit-
ted signal (voice), pause a few sec. after pushing [PTT],
hold the microphone 5 to 10 cm from your mouth and speak
at a normal voice level.
GRP
GRP
L
L
L
The HM-162E has a selector dial, which works various func-
tions.
➥ Each pushing
[VOL/SQL] changes [SELECTOR]’s action.
• Selector status indicator shows “
[[VVOOLL]]
,” “
[[SSQQLL]]
” or
“
[[DDIIAALL]]
” when [SELECTOR] functions
as an audio vol-
ume, squelch controller or channel selector, respectively.
➥ Pushing
[DIAL] changes [SELECTOR]’s action to channel
selector.
• “
[[DDIIAALL]]
” appears.
➥ Pushing
[ENT] or [CLR] returns [SELECTOR]’s action to the
audio volume when
“
[[SSQQLL]]
” or “
[[DDIIAALL]]
” is indicated on the
display
.
• Even if [ENT] or [CLR] hasn’t been pushed, [SELECTOR]’s
action returns to the audio volume automatically after 5 sec.
of inactivity.
After these instructions describe [SELECTOR] as follow:
[SELECTOR
VOL
] : Functions as the audio volume.
[SELECTOR
SQL
] : Functions as the squelch controller.
[SELECTOR
DIAL
]: Functions as the channel selector.
[SELECTOR] : Functions as the any other selector
or controller.
v Selector’s action
b Channel selection
n Receiving and transmitting
m Lock functions
DD
Channel 16
q Push [16•C] to select Channel 16.
w Push [DIAL] to return to the con-
dition before selecting Channel
16, (or rotate [SELECTOR
DIAL
]
to select an other channel.
DD
Call channel
q Push [16•C] for 1 sec. to select
call channel.
w Push [DIAL] to return to the con-
dition before selecting call chan-
nel, (or rotate [SELECTOR
DIAL
]
to select an other channel.
DD
International and other channel group’s
channels (U.S.A., DSC, ATIS—depending on the
connected transceiver’s version)
q Push [DIAL•DW ] to select a regular channel.
w While pushing [H/L], push [DIAL•DW ] to select a chan-
nel group.
• Depending on the connected transceiver’s version, channel
group selection is not available.
e Push [DIAL•DW ] then rotate [SELECTOR
DIAL
] to se-
lect a channel.
•“
DDUUPP
” appears for duplex channels.
U.S.A. channels
The Lock function electronically locks keys and switches to
prevent accidental changes and function access from the mi-
crophone.
All keys, switches and controllers on the transceiver are
functional.
DD
Activating the Lock function
➥ While pushing [H/L], push
[VOL/SQL•MONI ]
to turn the
Lock function ON or OFF.
•“ ” appears.
• Only [PWR] ([CLR]/[MENU]),
[DISTRESS], [PTT], [H/L],
[VOL/SQL•MONI ]
and [SE-
LECTOR] are functional.
DD
Activating the All Key Lock function
➥ While pushing [H/L], turn the
power ON by pushing [PWR] to
turn the All Key Lock function ON
or OFF.
•“ ” blinks.
• Only [PWR] ([CLR]/[MENU]),
[DISTRESS] and [PTT] are func-
tional.
é
