Bedienungsanleitung Icom IC-7200 (Seite 3 von 104) (Englisch)

670164

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

PRECAUTIONS

R WARNING RF EXPOSURE! This device emits

Radio Frequency (RF) energy. Extreme caution

should be observed when operating this device. If

you have any questions regarding RF exposure and

safety standards please refer to the Federal Com-

munications Commission Office of Engineering and

Technology’s report on Evaluating Compliance with

FCC Guidelines for Human Radio Frequency Electro-

magnetic Fields (OET Bulletin 65).

R WARNING HIGH VOLTAGE! NEVER touch an

antenna or internal antenna connector during trans-

mission. This may result in an electrical shock or burn.

R WARNING! NEVER operate the transceiver

while driving a vehicle. Safe driving requires your full

attention—anything less may result in an accident.

R NEVER apply AC power to the [DC13.8V] socket

on the transceiver rear panel. This could cause a ﬁre

or damage the transceiver.

R NEVER apply more than 16 V DC, such as a 24 V

battery, to the [DC13.8V] socket on the transceiver

rear panel. This could cause a fire or damage the

transceiver.

R NEVER let metal, wire or other objects touch any

internal part or connectors on the rear panel of the

transceiver. This may result in an electric shock or this

could cause a ﬁre or damage the transceiver.

R NEVER expose the transceiver to rain, snow or

any liquids.

DO NOT use or place the transceiver in areas with

temperatures below –10°C (+14°F) or above +60°C

(+140°F). Be aware that temperatures on a vehicle’s

dashboard can exceed +80°C (+176°F), resulting in

permanent damage to the transceiver if left there for

extended periods.

DO NOT place the transceiver in excessively dusty

environments or in direct sunlight.

DO NOT place the transceiver against walls or put

anything on top of the transceiver. This will obstruct

heat dissipation.

Place unit in a secure place to avoid inadvertent use

by children.

During mobile operation, NEVER place the trans-

ceiver where air bag deployment may be obstructed.

During mobile operation, DO NOT place the trans-

ceiver where hot or cold air blows directly onto it.

During mobile operation, DO NOT operate the trans-

ceiver without running the vehicle’s engine. When the

transceiver’s power is ON and your vehicle’s engine

is OFF, the vehicle’s battery will quickly become ex-

hausted.

Make sure the transceiver power is OFF before start-

ing the vehicle engine. This will avoid possible dam-

age to the transceiver by ignition voltage spikes.

During maritime mobile operation, keep the trans-

ceiver and microphone as far away as possible from

the magnetic navigation compass to prevent errone-

ous indications.

BE CAREFUL! The rear panel will become hot when

operating the transceiver continuously for long peri-

ods.

BE CAREFUL! If a linear amplifier is connected, set

the transceiver’s RF output power to less than the

linear ampliﬁer’s maximum input level, otherwise, the

linear ampliﬁer will be damaged.

Use Icom microphones only (supplied or optional).

Other manufacturer’s microphones have different pin

assignments, and connection to the IC-7200 may

damage the transceiver.

For U.S.A. only

Caution: Changes or modifications to this trans-

ceiver, not expressly approved by Icom Inc., could

void your authority to operate this transceiver under

FCC regulations.

Icom, Icom Inc. and the are registered trademarks of Icom

Incorporated (Japan) in the United States, the United Kingdom,

Germany, France, Spain, Russia and/or other countries.

Microsoft, Windows and Windows Vista are either registered trade-

marks or trademarks of Microsoft Corporation in the United States

and/or other countries.

All other products or brands are registered trademarks or trade-

marks of their respective holders.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Icom IC-7200 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info