12346
17
Zoom out
Zoom in
Vorherige Seite
1/116
Nächste Seite
4
1
PANEL DESCRIPTION
2001 NEW
@3 VOX/BREAK-IN SWITCH [VOX/BK-IN]
In SSB, AM and FM modes, push momentarily to
turn the VOX function ON and OFF (p. 54); push
for 1 sec. to enter VOX set mode (p. 54).
In CW mode, push momentarily to turn the semi
break-in, full break-in or break-in OFF (p. 55);
push for 1 sec. to enter break-in set mode (p. 55).
What is the VOX function?
The VOX function (voice operated transmission) starts trans-
mission without pushing the transmit switch or PTT switch
when you speak into the microphone; then, automatically re-
turns to receive when you stop speaking.
What is the break-in function?
Full break-in (QSK) activates the receiver between transmit-
ted dots and dashes. This is useful when operating in nets,
or during DX pileups and during contests, when fast ex-
changes are common.
@4 MONITOR SWITCH [MONITOR] (p. 56)
Monitors your transmitted signal.
Enters monitor set mode when pushed for 1 sec.
@5 FILTER SWITCH [FILTER] (p. 49)
Selects one of 3 IF lter settings.
Enters the lter set mode when pushed for 1 sec.
@6 CALL SWITCH [CALL] (p. 63)
Selects the call channel when pushed momentarily.
@7 TUNING DIAL (p. 21)
Changes the displayed frequency, selects set mode
items, etc.
@8
LOCK/SPEECH SWITCH [LOCK/SPCH]
Push momentarily to toggle the dial lock function
ON and OFF. (p. 52)
Pushing for 1 sec. announces the selected read-
out frequency and S-meter indication when an
optional UT-102 is installed. (p. 89)
@9 RIT/
TX CONTROL [RIT/
TX] (pgs. 47, 56)
Shifts the receive and/or transmit frequency without
changing the transmit and/or receive frequency
while the RIT and/or TX functions are ON.
Rotate the control clockwise to increase the frequency,
or rotate the control counterclockwise to decrease the
frequency.
The shift frequency range is ±9.99 kHz in 10 Hz steps.
#0 RIT SWITCH [RIT] (p. 47)
Turns the RIT function ON and OFF when pushed.
Use the [RIT/TX] control to vary the RIT frequency.
Adds the RIT shift frequency to the operating fre-
quency when pushed for 1 sec.
What is the RIT function?
The RIT (Receiver Incremental Tuning) shifts the receive fre-
quency without shifting the transmit frequency.
This is useful for ne tuning stations calling you on an off-fre-
quency or when you prefer to listen to slightly different-
sounding voice characteristics, etc.
#1 CLEAR SWITCH [CLEAR] (pgs. 47, 56)
Clears the RIT/TX shift frequency when pushed
for 1 sec.
Can be cleared instantly when [CLEAR] is pushed if the
Quick RIT Clear is set to ON (p. 85).
#2
TX SWITCH [
TX] (p. 56)
Turns the TX function ON and OFF when
pushed.
Use the [RIT/TX] control to vary the TX frequency.
Adds the TX shift frequency to the operating
frequency when pushed for 1 sec.
What is the
TX function?
The TX shifts the transmit frequency without shifting the re-
ceive frequency. This is useful for simple split frequency op-
eration in CW, etc.
#3 MEMORY CHANNEL SELECTOR [M-CH] (p. 61)
Select a memory channel.
Rotate clockwise to increase the memory channel; ro-
tate counterclockwise to decrease the memory channel.
#4 VFO/MEMORY SWITCH [VFO/MEMO]
Switches the selected readout operating mode
between the VFO mode and memory mode when
pushed. (pgs. 20, 61)
Transfers the memory contents to VFO when
pushed for 1 sec. (p. 64)
#5 MEMORY CLEAR SWITCH [M-CL] (p. 62)
Clears the selected readout memory channel con-
tents when pushed for 1 sec. in memory mode.
The channel becomes a blank channel.
This switch does not function in VFO mode.
#6 MEMORY WRITE SWITCH [MW] (p. 62)
Stores the selected readout frequency and operat-
ing mode into the displayed memory channel when
pushed for 1 sec.
This function is available both in VFO and memory
modes.
#7 PBT CLEAR SWITCH [PBTC] (p. 51)
Clears the PBT settings when pushed for 1 sec.
Low shift High shift
RIT/TX
IC-7400.qxd 02.4.2 11:35 Page 4
17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Icom IC-7400 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info