12346
51
Zoom out
Zoom in
Vorherige Seite
1/116
Nächste Seite
38
4
RECEIVE AND TRANSMIT
2001 NEW
F 1
F 2 F 3 F 4 F 5
F 1
F 2 F 3 F 4 F 5
F 1
F 2 F 3 F 4 F 5
AGC
DUP
1/4
RTY
SCP
DEC
FIL
SET
ADJ
RTTY-FIL
ON
Push [F4]
Push [F2]
Appears while the RTTY decoder screen is freezed
with [F2] operation.
Push [F3] to erase the displayed characters.
DD
RTTY decoder
The transceiver has an RTTY decoder for Baudot
(mark freq.: 2125 Hz, shift freq.: 170 Hz, 45 bps).
An external terminal unit (TU) or terminal node con-
nector (TNC) is not necessary for receiving a Baudot
signal.
q Push [CW/RTTY] to select RTTY mode.
After RTTY mode is selected, push [CW/RTTY] for 1 sec.
to select RTTY-R mode.
w Push [MENU] several times to select M1.
e Push [F4 RTY] to select RTTY menu.
r Push [F4 FIL] to turn the RTTY lter ON.
The RTTY decoder does not function when the RTTY l-
ter is turned OFF.
t Push [F2 DEC] to turn the RTTY decoder ON.
RTTY decoder screen appears.
y Push [F2] to freeze the current screen.
•“H appears while the function is in use.
u Push [F3] for 1 sec. to clear the displayed charac-
ters.
i Push [MENU] to exit the RTTY decoder screen.
Setting the decoder threshold level
Adjust the RTTY decoder threshold level if some char-
acters are displayed when no signal is received.
q Call up the RTTY decoder screen as described
above.
w Push [F1 ADJ] to select the threshold level setting
condition.
e Rotate the tuning dial to adjust the RTTY decoder
threshold level.
Push [F3] for 1 sec. to select the default condition.
r Push [MENU] to exit the RTTY decoder screen.
The number of line of text can be selected from 2 or
3 in the display. The UnShift On Space (USOS)
function and new line code can be set in the RTTY
set mode. (p. 39)
F 1
F 2 F 3 F 4 F 5
F 1
F 2 F 3 F 4 F 5
ADJ
å
9
Push [F1]
Threshold level indication
IC-7400.qxd 02.4.2 11:35 Page 38
51

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Icom IC-7400 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info